Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC CLS1000 MITSUBISHI THAILAND
IUPILON™
glasses,lens
high viscosity
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | MITSUBISHI THAILAND/CLS1000 |
---|---|---|---|
Hot deformation temperature | 0.45MPaUnannealed | ISO 75-2/Bf | 145 °C |
1.80MPaAnnealed | ISO 75-2/Af | 131 °C | |
Linear coefficient of thermal expansion | TD | ISO 11359-2 | 6.6E-05 cm/cm/°C |
MD | ISO 11359-2 | 6.5E-05 cm/cm/°C |
mechanical properties | Test Condition | Test Method | MITSUBISHI THAILAND/CLS1000 |
---|---|---|---|
Bending modulus | 23°C | ISO 178 | 2300 Mpa |
bending strength | 23°C | ISO 178 | 93.0 Mpa |
Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 88 kJ/m² |
Elongation at Break | 23°C | ISO 527-2 | 5.4 % |
Tensile modulus | 23°C | ISO 527-2 | 2400 Mpa |
tensile strength | 23°C | ISO 527-2 | 60.0 Mpa |
Electrical performance | Test Condition | Test Method | MITSUBISHI THAILAND/CLS1000 |
---|---|---|---|
Dielectric constant | 23°C | IEC 60250 | 3.10 1MHz |
Dielectric strength | IEC 60243-1 | 31 KV/mm | |
Dissipation factor | 23°C | IEC 60250 | 9E-03 1MHz |
Surface resistivity | IEC 60093 | 6E+15 Ω.cm | |
Volume resistivity | IEC 60093 | 3E+16 Ω.cm |
Physical properties | Test Condition | Test Method | MITSUBISHI THAILAND/CLS1000 |
---|---|---|---|
melt mass-flow rate | 300℃/1.2Kg | ISO 1133 | 5.3 cm3/10min |
Water absorption rate | (23°C,24hr) | ISO 62 | 0.24 % |