Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC ML-1105 JIAXING TEIJIN
PANLITE®
Casters
transparent,Food contact compliance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | JIAXING TEIJIN/ML-1105 |
|---|---|---|---|
| Hot deformation temperature | 0.45 MPa, Unannealed | ISO 75-2/B | 141 °C |
| 1.8 MPa, Unannealed | ISO 75-2/A | 129 °C | |
| Linear coefficient of thermal expansion | Across Flow | ISO 11359-2 | 7.0E-5 cm/cm/°C |
| Flow | ISO 11359-2 | 7.0E-5 cm/cm/°C | |
| Vicat softening temperature | ISO 306/B50 | 148 °C |
| mechanical properties | Test Condition | Test Method | JIAXING TEIJIN/ML-1105 |
|---|---|---|---|
| Bending modulus | ISO 178 | 2230 Mpa | |
| bending strength | ISO 178 | 93.0 Mpa | |
| Nominal tensile fracture strain | ISO 527-2/50 | > 50 % | |
| Tensile modulus | ISO 527-2/1 | 2400 Mpa | |
| Tensile strain | Yield | ISO 527-2/50 | 6.0 % |
| tensile strength | Yield | ISO 527-2/50 | 61.0 Mpa |
| Break | ISO 527-2/50 | 56.0 Mpa |
| Electrical performance | Test Condition | Test Method | JIAXING TEIJIN/ML-1105 |
|---|---|---|---|
| Surface resistivity | IEC 60093 | > 1.0E+15 ohms | |
| Volume resistivity | IEC 60093 | > 1.0E+15 ohms·cm |
| Physical properties | Test Condition | Test Method | JIAXING TEIJIN/ML-1105 |
|---|---|---|---|
| Shrinkage rate | Flow : 4.00 mm | Internal Method | 0.50 - 0.70 % |
| 横向Flow : 4.00 mm | Internal Method | 0.50 - 0.70 % | |
| Water absorption rate | 24 hr, 23°C | ISO 62 | 0.20 % |
| impact performance | Test Condition | Test Method | JIAXING TEIJIN/ML-1105 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179 | 无断裂 |
| optical performance | Test Condition | Test Method | JIAXING TEIJIN/ML-1105 |
|---|---|---|---|
| transmissivity | 3000 μm | ASTM D1003 | 41.0 % |