Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PBT 420HP-1001 SABIC INNOVATIVE NANSHA

VALOX™

Lawn equipment,Garden equipment,Industrial applications,Automotive External Parts,Electrical field,Electronic field,Architectural application field,Outdoor applications,Electrical appliances,Engine hood parts,Medical supplies,Nursing supplies,Plastic bag,Automotive interior parts,Casters,Household goods,Petroleum Applications,Natural gas supplies,sporting goods,Textile application,Lighting applications

Glass fiber reinforced,dimensional stability ,High rigidity,high strength,heat-resisting

Plastic Datasheets

Supplementary Information	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/420HP-1001
Filling material		ASTM D229	30 %

hardness	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/420HP-1001
Rockwell hardness	R-Scale	ASTM D785	118

thermal performance	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/420HP-1001
Hot deformation temperature	1.8MPa,Unannealed,3.20mm	ASTM D648	203 °C
		1.8MPa,Unannealed,64.0mmSpan	ISO 75-2/Af	204 °C
		0.45MPa,Unannealed,3.20mm	ASTM D648	220 °C
		0.45MPa,Unannealed,6.40mm	ASTM D648	216 °C
		0.45MPa,Unannealed,64.0mmSpan	ISO 75-2/Bf	217 °C
Linear coefficient of thermal expansion	MD：-40to40°C	ASTME831	2.5E-05 cm/cm/°C
		TD：-40to40°C	ISO 11359-2	1.2E-04 cm/cm/°C
		TD：-40to40°C	ASTME831	1.2E-04 cm/cm/°C
		MD：-40to40°C	ISO 11359-2	2.5E-05 cm/cm/°C
Vicat softening temperature		ASTM D152514	215 °C
		--	ISO 306/B120	215 °C
		--	ISO 306/B50	215 °C
		--	ISO 306/A50	223 °C

mechanical properties	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/420HP-1001
Bending modulus	50.0mmSpan	ASTM D790	7580 Mpa
Bending modulus			ISO 178	8500 Mpa
bending strength		ISO 178	195 Mpa
bending strength		Break,50.0mmSpan	ASTM D790	189 Mpa
Tensile modulus		ASTM D638	9300 Mpa
Tensile modulus			ISO 527-2/1	9300 Mpa
Tensile strain	Break	ISO 527-2/5	2.0 %
		Yield	ASTM D638	3.0 %
		Yield	ISO 527-2/5	2.0 %
		Break	ASTM D638	3.0 %
tensile strength	Break	ISO 527-2/5	125 Mpa
		Yield	ASTM D638	120 Mpa
		Yield	ISO 527-2/5	125 Mpa
		Break	ASTM D638	120 Mpa

Electrical performance	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/420HP-1001
Dielectric constant	1MHz	ASTM D150	3.70
Dielectric constant		100Hz	ASTM D150	3.80
Dielectric strength	3.20mm,inAir	ASTM D149	19 KV/mm
Dielectric strength		1.60mm,in Oil	ASTM D149	25 KV/mm
Dissipation factor	1MHz	ASTM D150	0.020
Dissipation factor		100Hz	ASTM D150	2E-03
Volume resistivity		ASTM D257	>3.2E+16 ohms·cm

Physical properties	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/420HP-1001
melt mass-flow rate	250°C/2.16kg	ASTM D1238	17 g/10min
Melt Volume Flow Rate (MVR)	250°C/2.16kg	ISO 1133	13.0 cm3/10min
Shrinkage rate	MD：--4	Internal Method	0.30-0.70 %
		TD：3.20mm	Internal Method	0.50-1.0 %
		MD：3.20mm	Internal Method	0.30-0.80 %
		MD：--2	Internal Method	0.50-0.80 %
		MD：--3	Internal Method	0.30-0.50 %
		TD：--4	Internal Method	0.50-1.0 %
		TD：--3	Internal Method	0.40-0.60 %
		TD：--5	Internal Method	0.60-0.90 %
Specific volume		ASTM D792	0.650 cm³/g
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.080 %
		Saturation,23°C	ISO 62	0.26 %
		24hr	ASTM D570	0.060 %

impact performance	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/420HP-1001
Charpy Notched Impact Strength	23°C	ISO 179/1eA	5.0 kJ/m²
Charpy Notched Impact Strength		-30°C	ISO 179/1eA	5.0 kJ/m²
Dart impact	23°C,TotalEnergy	ASTM D3763	8.00 J
Impact strength of cantilever beam gap	-30°C	ISO 180/1A	7.0 kJ/m²
Impact strength of cantilever beam gap		23°C	ISO 180/1A	8.0 kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	45 kJ/m²
Impact strength of simply supported beam without notch		23°C	ISO 179/1eU	45 kJ/m²
Suspended wall beam without notch impact strength	23°C	ISO 180/1U	45 kJ/m²
Suspended wall beam without notch impact strength		-30°C	ISO 180/1U	45 kJ/m²

Get App

Top