Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC LUVOCOM® 55-8647 LEHVOSS Group
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 55-8647 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1fU | 55 kJ/m² |
| 23°C | ISO 179/1eU | 60 kJ/m² |
| Mechanical properties | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 55-8647 |
|---|---|---|---|
| tensile strength | 断裂 | ISO 527-2 | 65.0 MPa |
| Tensile modulus | ISO 527-2 | 5000 MPa | |
| Tensile strain | 屈服 | ISO 527-2 | 3.5 % |
| Bending Strain | ISO 178 | 5.0 % | |
| Flexural modulus | ISO 178 | 4500 MPa | |
| bending strength | ISO 178 | 95.0 MPa |
| Electrical performance | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 55-8647 |
|---|---|---|---|
| insulation resistance | IEC 60167 | >1.0E+14 ohms | |
| Surface Resistivity | IEC 60093 | >1.0E+14 ohms |
| physical property | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 55-8647 |
|---|---|---|---|
| Shrinkage rate | DIN 16901 | 0.40to0.70 % | |
| Water absorption rate | 23°C,24hr | <0.20 % | |
| density | ISO 1183 | 1.28 g/cm³ | |
| Melt volume flow rate | 260°C/5.0kg | ISO 1133 | <10.0 cm³/10min |
| Thermal performance | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 55-8647 |
|---|---|---|---|
| thermal conductivity | 1.3 W/m/K | ||
| Continuous use temperature | UL 746B | 90.0 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 105 °C |
| vicat | ISO 306/A | 115 °C | |
| Linear coefficient of thermal expansion | MD | DIN 53752 | 6E-05 cm/cm/°C |
| maximum service temperature | ShortTerm | 140 °C |
Contact Us
Get App
Top