Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
MF MELMEX M Fine BIP (Oldbury) Limited
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | BIP (Oldbury) Limited/MELMEX M Fine |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ISO 180 | 9.8 kJ/m² | |
| Impact strength of cantilever beam gap | ISO 180/C | 2.2 kJ/m² |
| Mechanical properties | Test Condition | Test Method | BIP (Oldbury) Limited/MELMEX M Fine |
|---|---|---|---|
| bending strength | ISO 178 | 119 MPa |
| Electrical performance | Test Condition | Test Method | BIP (Oldbury) Limited/MELMEX M Fine |
|---|---|---|---|
| dielectric strength | --8 | IEC 60243-1 | 8.5 kV/mm |
| Compared to the Leakage Tracking Index (CTI) | IEC 60167 | PLC 0 | |
| dielectric strength | --2 | IEC 60243-1 | 6.1 kV/mm |
| flammability | Test Condition | Test Method | BIP (Oldbury) Limited/MELMEX M Fine |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | V-0 |
| Limiting Oxygen Index | ISO 4589-2 | 44 % |
| physical property | Test Condition | Test Method | BIP (Oldbury) Limited/MELMEX M Fine |
|---|---|---|---|
| Water absorption rate | Cold5 | DIN 53472 | 70.0 mg |
| Shrinkage rate | --2 | ISO 2577 | 0.85 % |
| Water absorption rate | Hot6 | ISO 62 | 50.0 mg |
| Apparent density | ISO 60 | 0.44 g/cm³ | |
| Shrinkage rate | ISO 171 | 3.5 | |
| --7 | ISO 2577 | 1.1 % | |
| density | ISO 1183 | 1.52 g/cm³ | |
| Shrinkage rate | --3 | ISO 2577 | 0.58 % |
| Water absorption rate | Cold4 | ISO 62 | 13.0 mg |
| Thermal performance | Test Condition | Test Method | BIP (Oldbury) Limited/MELMEX M Fine |
|---|---|---|---|
| Martin's heat-resistant temperature | DIN 43458 | 145 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/Ae | 186 °C |
Contact Us
Get App
Top