Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 PX10323-BKNAT SABIC INNOVATIVE NANSHA
LNP™ KONDUIT™
Automotive body panels、Automotive sector
Dimensional stability、Low Specific Gravity
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/PX10323-BKNAT |
|---|---|---|---|
| 23°C | ISO 180/1A | 3.0 kJ/m² | |
| ISO 180/1U | 8.0 kJ/m² | ||
| ASTM D256 | 26 J/m | ||
| ASTM D4812 | 150 J/m |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/PX10323-BKNAT |
|---|---|---|---|
| fracture | ISO 527-2/5 | 75.0 Mpa | |
| ASTM D638 | 1.0 % | ||
| --6 | ISO 178 | 90.0 Mpa | |
| --5 | ISO 178 | 14000 Mpa | |
| fracture | ASTM D638 | 54.0 Mpa | |
| 50.0mm span | ASTM D790 | 12400 Mpa | |
| --1 | ASTM D638 | 10800 Mpa | |
| fracture | ISO 527-2/5 | 0.90 % | |
| Fracture, 50.0mm span | ASTM D790 | 78.0 Mpa |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/PX10323-BKNAT |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | 3E+05 ohms |
| flammability | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/PX10323-BKNAT |
|---|---|---|---|
| UL flame retardant rating | 1.00mm | UL 94 | HB |
| Hot filament ignition temperature | 1.00mm | IEC 60695-2-13 | 825 °C |
| Burning wire flammability index | 1.00mm | IEC 60695-2-12 | 850650 °C |
| 1.60mm | IEC 60695-2-12 | 960 °C |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/PX10323-BKNAT |
|---|---|---|---|
| Shrinkage rate | TD:24小时 | ASTM D955 | 0.17 % |
| MD:24小时 | ASTM D955 | 0.15 % |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/PX10323-BKNAT |
|---|---|---|---|
| Horizontal: 23 to 80 ° C | 横向, 23到80℃ | ISO 11359-2 | 4.8E-05 cm/cm/°C |
| Flow: -30 to 80 ° C | ISO 11359-2 | 1.4E-05 cm/cm/°C | |
| --12 | ASTM D790/ISO 178 | 15 W/m/K | |
| Flow: -40 to 40 ° C | ASTME831 | 1.6E-05 cm/cm/°C | |
| Horizontal: -30 to 80 ° C | ISO 11359-2 | 4E-05 cm/cm/°C | |
| Flow: 23 to 80 ° C | 23到80℃ | ISO 11359-2 | 1.6E-05 cm/cm/°C |
| --14 | ISO 22007-2 | 18 W/m/K | |
| --11 | ASTM D790/ISO 178 | 3.5 W/m/K | |
| Horizontal: -40 to 40 ° C | 横向, -40到40℃ | ASTME831 | 3.6E-05 cm/cm/°C |
| ball-indentation hardness | 165°C | IEC 60695-10-2 | Pass |
| --13 | ISO 22007-2 | 1.5 W/m/K | |
| 1.8MPa, Unanealed, 64.0mm span | ISO 75-2/Af | 200 °C | |
| 1.8MPa, Unanealed, 3.20mm | ASTM D648 | 186 °C |
Contact Us
Get App
Top