Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 2061-6 Trinseo
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodTrinseo/ 2061-6
Impact strength of cantilever beam gap23°CASTM D256850 J/m
Dart impact23°C,TotalEnergyASTM D376389.3 J
Impact strength of cantilever beam gap23°CASTM D1822567 kJ/m²
23°CASTM D256NoBreak
hardnessTest ConditionTest MethodTrinseo/ 2061-6
Rockwell hardnessM计秤ASTM D78573
R计秤ASTM D785118
Electrical performanceTest ConditionTest MethodTrinseo/ 2061-6
Dissipation Factor50HzASTM D1501E-03
dielectric constant60HzASTM D1503.00
Volume resistivityASTM D2572E+17 ohms·cm
dielectric strengthASTM D14917 kV/mm
Dissipation Factor1MHzASTM D1502E-03
dielectric constant1MHzASTM D1503.00
Mechanical propertiesTest ConditionTest MethodTrinseo/ 2061-6
Taber abraserASTM D104445 %
elongation断裂ASTM D638150 %
屈服ASTM D6386.0 %
Tensile modulusASTM D6382410 MPa
tensile strength 断裂ASTM D63868.3 MPa
Flexural modulusASTM D7902410 MPa
tensile strength 屈服ASTM D63862.1 MPa
bending strengthASTM D79096.5 MPa
flammabilityTest ConditionTest MethodTrinseo/ 2061-6
UL flame retardant rating0.75mmUL 94V-2
3.0mmUL 94HB
1.5mmUL 94V-2
Limiting Oxygen IndexISO 4589-226 %
physical property Test ConditionTest MethodTrinseo/ 2061-6
Shrinkage rateMDASTM D9550.50to0.70 %
Water absorption rate平衡,23°C,50%RHASTM D5700.32 %
23°C,24hrASTM D5700.15 %
densityASTM D7921.20 g/cm³
melt mass-flow rate300°C/1.2kgASTM D12386.0 g/10min
Thermal performanceTest ConditionTest MethodTrinseo/ 2061-6
Heat distortion temperature1.8MPa,未退火，HDTASTM D648129 °C
1.8MPa,退火，HDTASTM D648142 °C
vicatASTM D15255156 °C
Linear coefficient of thermal expansionMD：-40到82°CASTM D6966.8E-05 cm/cm/°C
Heat distortion temperature0.45MPa,退火，HDTASTM D648145 °C

Contact Us

Get App

Top