Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA6 1010C2 ENVALIOR JIANGSU
Akulon®
Electrical field,Electronic field
Oil resistant,wear resistant,High toughness
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | ENVALIOR JIANGSU/1010C2 |
---|---|---|---|
Hot deformation temperature | 0.45 MPa, Unannealed | ISO 75-2/B | 180 °C |
1.8 MPa, Unannealed | ISO 75-2/A | 59.0 °C | |
Linear coefficient of thermal expansion | Across Flow | ISO 11359-2 | 8.0E-5 cm/cm/°C |
Flow | ISO 11359-2 | 7.0E-5 cm/cm/°C | |
Melting temperature | ISO 11357-3 | 220 °C |
mechanical properties | Test Condition | Test Method | ENVALIOR JIANGSU/1010C2 |
---|---|---|---|
Bending modulus | ISO 178 | 2800 Mpa | |
bending strength | ISO 178 | 102 Mpa | |
Nominal tensile fracture strain | ISO 527-2 | 18 % | |
Tensile modulus | ISO 527-2 | 3400 Mpa | |
Tensile strain | Yield | ISO 527-2 | 4.2 % |
tensile strength | Yield | ISO 527-2 | 87.0 Mpa |
Electrical performance | Test Condition | Test Method | ENVALIOR JIANGSU/1010C2 |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | PLC 0 | |
Dielectric strength | IEC 60243-1 | 27 KV/mm | |
Dissipation factor | 100 Hz | IEC 60250 | 0.011 |
1 MHz | IEC 60250 | 0.023 | |
Relative permittivity | 100 Hz | IEC 60250 | 4.00 |
1 MHz | IEC 60250 | 4.00 | |
Surface resistivity | IEC 60093 | -- ohms | |
Volume resistivity | IEC 60093 | > 1.0E+15 ohms·cm |
Physical properties | Test Condition | Test Method | ENVALIOR JIANGSU/1010C2 |
---|---|---|---|
density | ISO 1183 | 1.13 g/cm³ | |
Shrinkage rate | 横向Flow | ISO 294-4 | 1.3 % |
Flow | ISO 294-4 | 1.2 % | |
Stickiness | ISO 307 | 118 cm³/g | |
Water absorption rate | Equilibrium, 23°C, 50% RH | ISO 62 | 2.8 % |
impact performance | Test Condition | Test Method | ENVALIOR JIANGSU/1010C2 |
---|---|---|---|
Charpy Notched Impact Strength | 23°C | ISO 179 | 4.2 kJ/m² |
Impact strength of simply supported beam without notch | 23°C | ISO 179 | 无断裂 |
flammability | Test Condition | Test Method | ENVALIOR JIANGSU/1010C2 |
---|---|---|---|
Flammability level | UL 94 | V-2 |