Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Unspecified Modified Plastics MPP-S1 美国Modified Plastics
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | 美国Modified Plastics/Modified Plastics MPP-S1 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,6.35mm | ASTM D256 | 21 J/m |
| Suspended wall beam without notch impact strength | 23°C,6.35mm | ASTM D256 | 850 J/m |
| Electrical performance | Test Condition | Test Method | 美国Modified Plastics/Modified Plastics MPP-S1 |
|---|---|---|---|
| Dissipation Factor | ASTM D150 | 2E-04 | |
| Volume resistivity | ASTM D257 | 1E+17 ohms·cm | |
| dielectric strength | ASTM D149 | 26 kV/mm | |
| dielectric constant | ASTM D150 | 2.25 |
| Mechanical properties | Test Condition | Test Method | 美国Modified Plastics/Modified Plastics MPP-S1 |
|---|---|---|---|
| elongation | 屈服 | ASTM D638 | 10 % |
| bending strength | 屈服 | ASTM D790 | 48.3 MPa |
| compressive strength | ASTM D695 | 46.9 MPa | |
| tensile strength | 屈服 | ASTM D638 | 34.5 MPa |
| physical property | Test Condition | Test Method | 美国Modified Plastics/Modified Plastics MPP-S1 |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D570 | 5E-03 % |
| density | ASTM D792 | 0.908 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 1.5 % |
| Thermal performance | Test Condition | Test Method | 美国Modified Plastics/Modified Plastics MPP-S1 |
|---|---|---|---|
| MD | ASTM D696 | 6.8E-05 cm/cm/°C | |
| Hot deformation temperature (HDT) | 1.8MPa,未退火，HDT | ASTM D648 | 98.9 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 118 °C | |
| thermal conductivity | ASTMC177 | 0.12 W/m/K |
Contact Us
Get App
Top