Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

TPE UN-7100-55 TEKNOR APEX USA
UNIPRENE®
--
plug、Washers、pipeline、Damping pad、Weatherproof sealing stri、expansion joint、Glazing
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Mechanical properties | Test Condition | Test Method | TEKNOR APEX USA/UN-7100-55 |
---|---|---|---|
compression set | 100℃,22.0hr | ASTM D-395 | 29 % |
Fracture tensile strength | 横向流量,断裂 | ASTM D-412 | 4.62 Mpa |
elongation at break | 横向流量 | ASTM D-412 | 320 % |
Shore hardness | 支撑A | ASTM D-2240 | 60 |
tear strength | ASTM D-624 | 15.8 kN/m |
physical property | Test Condition | Test Method | TEKNOR APEX USA/UN-7100-55 |
---|---|---|---|
melt mass-flow rate | 230℃/2.16kg | ASTM D-1238 | 0.60 g/10min |
aging | Test Condition | Test Method | TEKNOR APEX USA/UN-7100-55 |
---|---|---|---|
Change rate of ultimate elongation in air | 135℃,24hr | ASTM D-573 | 7.0 % |
Change rate of hardness (Shore) in the air | 支撑A,135℃,24hr | ASTM D-573 | 60 |
volume change | 25℃,70hr,在IRM 油中 | ASTM D-471 | 23 % |
Change rate of tensile strength in air | 横向流量:135℃,24hr | ASTM D-573 | 3.0 % |
横向流量:23℃,70hr,在IRM 油中 | ASTM D-471 | 22 % | |
Change rate of ultimate elongation in air | 横向流量:23℃,70hr,在IRM 油中 | ASTM D-471 | 32 % |
Thermal performance | Test Condition | Test Method | TEKNOR APEX USA/UN-7100-55 |
---|---|---|---|
brittle temperature | ASTM D-746 | -60.0 °C |
Contact Us
Get App
Top