Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC NAXELL™ PC110-10G MRC USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | MRC USA/NAXELL™ PC110-10G |
---|---|---|---|
InstrumentedDartImpact | 23°C,3.18mm,TotalEnergy | ASTM D3763 | 24.4 J |
Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 110 J/m |
Mechanical properties | Test Condition | Test Method | MRC USA/NAXELL™ PC110-10G |
---|---|---|---|
Flexural modulus | 23°C,3.18mm | ASTM D790 | 3450 MPa |
tensile strength | 屈服,23°C,3.18mm | ASTM D638 | 76.0 MPa |
elongation | 断裂,23°C,3.18mm | ASTM D638 | 8.0 % |
bending strength | 23°C,3.18mm | ASTM D790 | 110 MPa |
physical property | Test Condition | Test Method | MRC USA/NAXELL™ PC110-10G |
---|---|---|---|
Shrinkage rate | MD | ASTM D955 | 0.20to0.40 % |
density | ASTM D792 | 1.25 g/cm³ | |
melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 8.0 g/10min |
Thermal performance | Test Condition | Test Method | MRC USA/NAXELL™ PC110-10G |
---|---|---|---|
Heat distortion temperature | 1.8MPa,未退火,HDT | ASTM D648 | 138 °C |
0.45MPa,未退火,HDT | ASTM D648 | 143 °C | |
Linear coefficient of thermal expansion | MD:-40to35°C | ASTM D696 | 3.2E-05 cm/cm/°C |
Contact Us
Get App
Top