Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
DAP Sumitomo DAP FS-5 SBHPP
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SBHPP/Sumitomo DAP FS-5 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256A | 32 J/m |
| Mechanical properties | Test Condition | Test Method | SBHPP/Sumitomo DAP FS-5 |
|---|---|---|---|
| tensile strength | ASTM D638 | 69.0 MPa | |
| compressive strength | ASTM D695 | 131 MPa | |
| Flexural modulus | ASTM D790 | 11700 MPa | |
| bending strength | ASTM D790 | 110 MPa |
| Electrical performance | Test Condition | Test Method | SBHPP/Sumitomo DAP FS-5 |
|---|---|---|---|
| dielectric strength | ASTM D149 | 15 kV/mm | |
| Dissipation Factor | 1MHz | ASTM D150 | 0.014 |
| Compared to the Leakage Tracking Index (CTI) | IEC 60112,ASTMD3638 | PLC 0 | |
| dielectric constant | 1MHz | ASTM D150 | 3.70 |
| arc resistance | ASTM D495 | 175 sec |
| flammability | Test Condition | Test Method | SBHPP/Sumitomo DAP FS-5 |
|---|---|---|---|
| Limiting Oxygen Index | ASTM D2863 | 29 % |
| physical property | Test Condition | Test Method | SBHPP/Sumitomo DAP FS-5 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.20to0.40 % |
| density | ASTM D792 | 1.91 g/cm³ | |
| Water absorption rate | ASTM D570 | 0.35 % |
| Thermal performance | Test Condition | Test Method | SBHPP/Sumitomo DAP FS-5 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648A | >260 °C |
| RTI Imp | UL 746 | 130 °C | |
| Linear coefficient of thermal expansion | MD | ASTME831 | 1.8E-05 cm/cm/°C |
| thermal conductivity | ASTMC518 | 0.36 W/m/K | |
| RTI | UL 746 | 130 °C | |
| RTI Elec | UL 746 | 130 °C |
Contact Us
Get App
Top