Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

LDPE AEI SX522A:CM401 and SX522A:CM401CDS UK AEI Compounds
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Supplementary Information | Test Condition | Test Method | UK AEI Compounds/AEI SX522A:CM401 and SX522A:CM401CDS |
|---|---|---|---|
| CureTime | 1.50mm | 14.0 day | |
| 800.0μm | 5.0 day |
| thermal performance | Test Condition | Test Method | UK AEI Compounds/AEI SX522A:CM401 and SX522A:CM401CDS |
|---|---|---|---|
| Cold bend | -70°C | IEC 60811-1-4 | pass |
| thermosetting | Elongationunderload,20N/cm2:200°C | IEC 60811-2-1 | <100 % |
| Permanentelongationaftercooling | IEC 60811-2-1 | 0.0 % |
| mechanical properties | Test Condition | Test Method | UK AEI Compounds/AEI SX522A:CM401 and SX522A:CM401CDS |
|---|---|---|---|
| Tensile strain | Break | IEC 60811-1-1 | 450 % |
| tensile strength | IEC 60811-1-1 | 18.0 MPa |
| Electrical performance | Test Condition | Test Method | UK AEI Compounds/AEI SX522A:CM401 and SX522A:CM401CDS |
|---|---|---|---|
| Dielectric strength | 20°C | IEC 60243-1 | 21 kV/mm |
| Dissipation factor | 23°C | IEC 60250 | 3E-04 |
| Relative permittivity | 23°C,50Hz | IEC 60250 | 2.00 |
| Volume resistivity | 20°C | BS6622 | >1.0E+16 ohms·cm |
| Physical properties | Test Condition | Test Method | UK AEI Compounds/AEI SX522A:CM401 and SX522A:CM401CDS |
|---|---|---|---|
| density | BS2782620A | 0.920 g/cm³ | |
| melt mass-flow rate | 190°C/2.16kg | Internal Method | 1.0 g/10min |
| aging | Test Condition | Test Method | UK AEI Compounds/AEI SX522A:CM401 and SX522A:CM401CDS |
|---|---|---|---|
| Change rate of tensile strength in air | 135°C,168hr | IEC 60811-1-2 | 7.0 % |
| Tensile stress change rate | 135°C,168hr,Break | IEC 60811-1-2 | -7.0 % |