Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 6 NATURAL Dilaplast S.p.A.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Dilaplast S.p.A./6 NATURAL |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ISO 180 | 6.0 kJ/m² |
| Electrical performance | Test Condition | Test Method | Dilaplast S.p.A./6 NATURAL |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 1 | |
| dielectric strength | ASTM D149 | 18 kV/mm |
| Mechanical properties | Test Condition | Test Method | Dilaplast S.p.A./6 NATURAL |
|---|---|---|---|
| Tensile strain | 断裂 | ISO 527-2 | 20 % |
| tensile strength | 屈服 | ISO 527-2 | 70.0 MPa |
| Flexural modulus | ISO 178 | 2.50 MPa |
| flammability | Test Condition | Test Method | Dilaplast S.p.A./6 NATURAL |
|---|---|---|---|
| Hot filament ignition temperature | 2.0mm | IEC 60695-2-13 | 750 °C |
| physical property | Test Condition | Test Method | Dilaplast S.p.A./6 NATURAL |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 1.1to1.5 % |
| density | ISO 1183 | 1.14 g/cm³ |
| Thermal performance | Test Condition | Test Method | Dilaplast S.p.A./6 NATURAL |
|---|---|---|---|
| vicat | ISO 306/B50 | 190 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 70.0 °C |
Contact Us
Get App
Top