Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PARA LUVOCOM® 16-VAP 10 LEHVOSS Group
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 16-VAP 10 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 36 kJ/m² |
| Mechanical properties | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 16-VAP 10 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 32000 MPa | |
| tensile strength | 断裂 | ISO 527-2 | 245 MPa |
| Tensile strain | 屈服 | ISO 527-2 | 1.0 % |
| Bending Strain | ISO 178 | 1.3 % | |
| Flexural modulus | ISO 178 | 27000 MPa | |
| bending strength | ISO 178 | 360 MPa |
| Electrical performance | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 16-VAP 10 |
|---|---|---|---|
| insulation resistance | IEC 60167 | <1.0E+2 ohms | |
| Surface Resistivity | IEC 60093 | <1.0E+2 ohms |
| physical property | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 16-VAP 10 |
|---|---|---|---|
| Shrinkage rate | DIN 16901 | 0.0to0.10 % | |
| Water absorption rate | 23°C,24hr | <0.30 % | |
| density | ISO 1183 | 1.40 g/cm³ |
| Thermal performance | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 16-VAP 10 |
|---|---|---|---|
| thermal conductivity | 1.0 W/m/K | ||
| Continuous use temperature | UL 746B | 130 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 240 °C |
| Linear coefficient of thermal expansion | MD | DIN 53752 | 4E-06 cm/cm/°C |
| maximum service temperature | ShortTerm | 180 °C |
Contact Us
Get App
Top