Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

UHMWPE L4000 MITSUI CHEM JAPAN
LUBMER™
bearing,Automotive interior parts,Engine parts
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | MITSUI CHEM JAPAN/L4000 |
---|---|---|---|
Rockwell hardness | R-Scale | ASTM D785 | 53 |
thermal performance | Test Condition | Test Method | MITSUI CHEM JAPAN/L4000 |
---|---|---|---|
Hot deformation temperature | 0.45MPa,Unannealed | ASTM D648 | 80.0 °C |
Linear coefficient of thermal expansion | MD | ASTM D696 | 1.3E-04 cm/cm/°C |
Vicat softening temperature | ASTM D15254 | 130 °C |
mechanical properties | Test Condition | Test Method | MITSUI CHEM JAPAN/L4000 |
---|---|---|---|
Bending modulus | 23°C,3.00mm,48.0mmSpan | ASTM D790 | 1590 Mpa |
bending strength | Yield,23°C,3.00mm,48.0mmSpan | ASTM D790 | 37.0 Mpa |
elongation | Break,23°C | ASTM D638 | 12 % |
tensile strength | Break,23°C | ASTM D638 | 41.0 Mpa |
Electrical performance | Test Condition | Test Method | MITSUI CHEM JAPAN/L4000 |
---|---|---|---|
Dielectric constant | 23°C | ASTM D150 | 2.30 |
Dielectric strength | ASTM D149 | 45 KV/mm | |
Dissipation factor | 1MHz | ASTM D150 | 1.5E-04 |
Volume resistivity | ASTM D257 | 1E+17 ohms·cm |
Physical properties | Test Condition | Test Method | MITSUI CHEM JAPAN/L4000 |
---|---|---|---|
Shrinkage rate | MD:2.00mm | ASTM D955 | 1.8 % |
TD:2.00mm | ASTM D955 | 1.5 % | |
Water absorption rate | 24hr | ASTM D570 | 0.010 % |
impact performance | Test Condition | Test Method | MITSUI CHEM JAPAN/L4000 |
---|---|---|---|
Impact strength of cantilever beam gap | 23°C,2.00mm | ASTM D256 | 190 J/m |
flammability | Test Condition | Test Method | MITSUI CHEM JAPAN/L4000 |
---|---|---|---|
UL flame retardant rating | 1.6mm | UL 94 | HB |