plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC URC2500 IDEMITSU JAPAN
TARFLON™ 
Lighting diffuser
Flame retardant,High reflectivity
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodIDEMITSU JAPAN/URC2500
Hot deformation temperature0.45 MPa, UnannealedISO 75-2/B138 °C
1.8 MPa, UnannealedISO 75-2/A126 °C
Linear coefficient of thermal expansionFlowISO 11359-26.5E-5 cm/cm/°C
RTIUL 74680.0 °C
RTI ElecUL 74680.0 °C
RTI ImpUL 74680.0 °C
mechanical propertiesTest ConditionTest MethodIDEMITSU JAPAN/URC2500
Bending modulusISO 1782400 Mpa
bending strengthISO 17890.0 Mpa
Nominal tensile fracture strainISO 527-270 %
tensile strengthYieldISO 527-260.0 Mpa
Physical propertiesTest ConditionTest MethodIDEMITSU JAPAN/URC2500
densityISO 11831.28 g/cm³
Melt Volume Flow Rate (MVR)300°C/1.2 kgISO 113328.0 cm3/10min
Shrinkage rateFlow : 2.00 mmInternal Method0.50 - 0.70 %
横向Flow : 2.00 mmInternal Method0.50 - 0.70 %
impact performanceTest ConditionTest MethodIDEMITSU JAPAN/URC2500
Charpy Notched Impact Strength23°CISO 17940 kJ/m²
flammabilityTest ConditionTest MethodIDEMITSU JAPAN/URC2500
UL flame retardant rating1.5 mmUL 94V-0
optical performanceTest ConditionTest MethodIDEMITSU JAPAN/URC2500
ISOPC-MD10
reflectivity97.0
transmissivity1000 μmISO 13468-10.6 %
injectionTest ConditionTest MethodIDEMITSU JAPAN/URC2500
drying temperature120 °C
drying time5.0 to 8.0 hr
Mold temperature80 to 90 °C
Temperature at the front of the material cylinder260 to 280 °C
Temperature at the rear of the barrel260 to 280 °C
Temperature in the middle of the barrel260 to 280 °C