Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEEK Comco PEEK GF 30 Comco Nylon GmbH
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Comco Nylon GmbH/Comco PEEK GF 30 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179/1eU | 35 kJ/m² | |
| Charpy Notched Impact Strength | ISO 179/1eA | 4.0 kJ/m² |
| hardness | Test Condition | Test Method | Comco Nylon GmbH/Comco PEEK GF 30 |
|---|---|---|---|
| ball-indentation hardness | ISO 2039-1 | 270 MPa | |
| Rockwell hardness | M计秤 | ISO 2039-2 | 99 |
| Mechanical properties | Test Condition | Test Method | Comco Nylon GmbH/Comco PEEK GF 30 |
|---|---|---|---|
| Tensile strain | 断裂,23°C | ISO 527-2 | 5.0 % |
| Tensile modulus | 23°C | ISO 527-2 | 6300 MPa |
| tensile strength | 屈服,23°C | ISO 527-2 | 90.0 MPa |
| compression stress | 2%应变 | ISO 604 | 81.0 MPa |
| 1%应变 | ISO 604 | 41.0 MPa |
| Electrical performance | Test Condition | Test Method | Comco Nylon GmbH/Comco PEEK GF 30 |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 3 | |
| dielectric strength | IEC 60243-1 | 24 kV/mm | |
| Volume resistivity | IEC 60093 | >1.0E+14 ohms·cm | |
| relative permittivity | 100Hz | IEC 60250 | 3.20 |
| Dissipation Factor | 100Hz | IEC 60250 | 1E-03 |
| relative permittivity | 1MHz | IEC 60250 | 3.60 |
| Surface Resistivity | IEC 60093 | >1.0E+13 ohms | |
| Dissipation Factor | 1MHz | IEC 60250 | 2E-03 |
| flammability | Test Condition | Test Method | Comco Nylon GmbH/Comco PEEK GF 30 |
|---|---|---|---|
| UL flame retardant rating | 3.00mm | UL 94 | V-0 |
| 6.00mm | UL 94 | V-0 | |
| Limiting Oxygen Index | ISO 4589-2 | 40 % |
| physical property | Test Condition | Test Method | Comco Nylon GmbH/Comco PEEK GF 30 |
|---|---|---|---|
| Water absorption rate | 饱和,23°C | 0.30 % | |
| 平衡,23°C,50%RH | 0.14 % | ||
| density | ISO 1183 | 1.51 g/cm³ |
| Thermal performance | Test Condition | Test Method | Comco Nylon GmbH/Comco PEEK GF 30 |
|---|---|---|---|
| maximum service temperature | inairforshortperiods | 310 °C | |
| Linear coefficient of thermal expansion | MD：23到60°C | 3E-05 cm/cm/°C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 230 °C |
| maximum service temperature | inaircontinuosly | 250 °C | |
| melting temperature | 340 °C | ||
| Linear coefficient of thermal expansion | MD：23到100°C | 3E-05 cm/cm/°C | |
| MD：导热系数 | 0.30 W/m/K |
Contact Us
Get App
Top