Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT ST820 NC010 DUPONT USA
Cristin®
Electronic and electrical components
High impact resistance
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | DUPONT USA/ST820 NC010 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | -40°C | ISO 180/1U | 270 kJ/m² |
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | NoBreak |
| 23°C | ISO 179/1eU | NoBreak | |
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | NoBreak |
| -30°C | ISO 180/1U | NoBreak |
| Other performance | Test Condition | Test Method | DUPONT USA/ST820 NC010 |
|---|---|---|---|
| Limiting Oxygen Index | ASTM D2863 | 22 % |
| hardness | Test Condition | Test Method | DUPONT USA/ST820 NC010 |
|---|---|---|---|
| Rockwell hardness | R级 | ISO 2039-2 | 104 |
| Electrical performance | Test Condition | Test Method | DUPONT USA/ST820 NC010 |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 | |
| Surface Resistivity | ASTM D257/IEC 60093 | 1.00E+15 Ω | |
| dielectric strength | IEC 60243-1 | 27 KV/mm | |
| Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm | |
| Dissipation Factor | 100Hz | IEC 60250 | 0.020 |
| Volume resistivity | ASTM D257/IEC 60093 | >1E13 Ω.cm | |
| Surface Resistivity | IEC 60093 | 1E+15 ohms | |
| Dissipation Factor | 1MHz | IEC 60250 | 0.019 |
| Mechanical properties | Test Condition | Test Method | DUPONT USA/ST820 NC010 |
|---|---|---|---|
| bending strength | ASTM D790/ISO 178 | 50 kg/cm²(MPa)[Lb/in²] | |
| Tensile modulus | ISO 527-2 | 1700 Mpa | |
| Flexural modulus | ASTM D790/ISO 178 | 1550 kg/cm²(MPa)[Lb/in²] | |
| Tensile strain | 屈服 | ISO 527-2 | 7.0 % |
| tensile strength | 23℃ | ASTM D638 | 37 MPa |
| elongation at break | ASTM D638/ISO 527 | 150 % | |
| Impact strength of cantilever beam gap | ASTM D256 | 117 J/m | |
| Suspended wall beam without notch impact strength | 23℃ | ASTM D256 | No Break J/m |
| compressive strength | 23℃ | ASTM D695 | 43 MPa |
| Tensile modulus | 23℃ | ASTM D638 | 1600 MPa |
| Nominal tensile fracture strain | ISO 527-2 | >50 % | |
| Impact strength of cantilever beam gap | 23℃ | ASTM D256 | No Break J/m |
| bending strength | ISO 178 | 50.0 Mpa | |
| Flexural modulus | ISO 178 | 1550 Mpa | |
| Impact strength of cantilever beam gap | -40℃ | ASTM D256 | 117 J/m |
| elongation at break | 23℃ | ASTM D638 | 150 % |
| Tensile modulus | ASTM D638/ISO 527 | 1700 kg/cm²(MPa)[Lb/in²] | |
| Flexural modulus | 23℃ | ASTM D790 | 1680 MPa |
| tensile strength | 屈服 | ISO 527-2 | 38.0 Mpa |
| bending strength | 23℃ | ASTM D638 | 53 MPa |
| Suspended wall beam without notch impact strength | -40℃ | ASTM D256 | No Break J/m |
| other | Test Condition | Test Method | DUPONT USA/ST820 NC010 |
|---|---|---|---|
| characteristic | 无筋.超级坚固.注射成型 |
| Physical properties | Test Condition | Test Method | DUPONT USA/ST820 NC010 |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 1.8 % | |
| density | ASTM D792/ISO 1183 | 1220 | |
| Water absorption rate | ASTM D570/ISO 62 | 0.12 % |
| flammability | Test Condition | Test Method | DUPONT USA/ST820 NC010 |
|---|---|---|---|
| UL flame retardant rating | 0.8mm | IEC 60695-11-10,-20 | HB |
| Fogging-G-value | condensate | ISO 6452 | 1E-04 g |
| FMVSS flammability | FMVSS302 | B | |
| UL flame retardant rating | 0.8mm | UL 94 | HB |
| Limiting Oxygen Index | ISO 4589-2 | 19 % | |
| burning rate | 1.00mm | ISO 3795 | 38 mm/min |
| physical property | Test Condition | Test Method | DUPONT USA/ST820 NC010 |
|---|---|---|---|
| Shrinkage rate | TD | ISO 294-4 | 1.8 % |
| MD | ISO 294-4 | 1.9 % | |
| Water absorption rate | 饱和,23°C,2.00mm | ISO 62 | 0.31 % |
| MediumDensity | 1.03 g/cm³ | ||
| Ejection Temperature | 170 °C | ||
| Shrinkage rate | MD2 | ISO 294-4 | 2.5 % |
| SpecificHeatCapacity of Melt | 2100 J/kg/°C | ||
| ThermalConductivityofMelt | 0.20 W/m/K | ||
| Water absorption rate | 平衡,23°C,2.00mm,50%RH | ISO 62 | 0.12 % |
| Thermal performance | Test Condition | Test Method | DUPONT USA/ST820 NC010 |
|---|---|---|---|
| Combustibility (rate) | UL 94 | HB(0.8mm) | |
| Linear coefficient of thermal expansion | 垂直流动方向 | ASTM E831 | 0.00019 cm/cm/℃ |
| vicat | ISO 306/B50 | 125 °C | |
| Heat distortion temperature | 0.45MPa,退火，HDT | ISO 75-2/B | 145 °C |
| melting temperature | ISO 11357-3 | 225 °C | |
| ℃ | 225 225 | ||
| Heat distortion temperature | HDT | ASTM D648/ISO 75 | 145 ℃（℉） |
| vicat | ASTM D1525/ISO R306 | 216 ℃（℉） | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 100 °C |
| 264 psi，未退火，HDT | ASTM D648 | 47 ℃ | |
| Linear coefficient of thermal expansion | 平行流动方向 | ASTM E831 | 0.00019 cm/cm/℃ |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 50.0 °C |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 1.9E-04 cm/cm/°C |
| melting temperature | 225 ℃（℉） | ||
| Linear coefficient of thermal expansion | TD | ISO 11359-2 | 1.9E-04 cm/cm/°C |
Contact Us
Get App
Top