Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS H950 INEOS USA
Novodur® 
Food service sector、Automotive sector、Application in the automo、Automotive External Parts
heat-resisting、Aging resistance、wear resistant、Easy to spray
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodINEOS USA/H950
Impact strength of cantilever beam gap-30°CISO180/A8.0 kJ/m²
23°CISO180/A17 kJ/m²
Charpy Notched Impact Strength-30°CISO1797.0 kJ/m²
Impact strength of simply supported beam without notch23°CISO179140 kJ/m²
-30°CISO17990 kJ/m²
Charpy Notched Impact Strength23°CISO17916 kJ/m²
hardnessTest ConditionTest MethodINEOS USA/H950
ISO2039-1110 Mpa
Electrical performanceTest ConditionTest MethodINEOS USA/H950
Dissipation Factor1MHzIEC602500.010
Surface ResistivityIEC60093>1.0E+15 ohms
CTIIEC60112600 V
1MHzIEC602503.00
Volume resistivityIEC60093>1.0E+15 ohms·cm
dielectric strength1.50mmIEC60243-137 KV/mm
Dissipation Factor100HzIEC602506E-03
100HzIEC602503.20
Mechanical propertiesTest ConditionTest MethodINEOS USA/H950
Tensile strain屈服,23°CISO527-22.7 %
Bending stressISO17880.0 Mpa
Tensile modulusISO527-22600 Mpa
Tensile stress屈服,23°CISO527-250.0 Mpa
Flexural modulusISO1782600 Mpa
physical property Test ConditionTest MethodINEOS USA/H950
densityISO11831.05 g/cm³
Melt volume flow rate220°C/10.0kgISO11334.00 cm3/10min
Shrinkage rateISO294-40.50到0.70 %
Thermal performanceTest ConditionTest MethodINEOS USA/H950
vicatISO306/B50113 °C
Hot deformation temperature 31.8MPa,退火ISO75-2/A101 °C
MDISO11359-27E-05 cm/cm/°C
Hot deformation temperature 30.45MPa,退火ISO75-2/B108 °C

Contact Us

Get App

Top