plas
Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPO V0150B-701 SABIC INNOVATIVE SHANGHAI
NORYL™ 
Automotive interior parts,Electrical applications
High temperature resistan,High mobility,Glass fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodSABIC INNOVATIVE SHANGHAI/V0150B-701
Ball Pressure TestH 358/30ISO 2039-1113 Mpa
thermal performanceTest ConditionTest MethodSABIC INNOVATIVE SHANGHAI/V0150B-701
Ball Pressure Test140°C12IEC 60695-10-2通过
123 to 127°CIEC 60695-10-2通过
Hot deformation temperature1.8 MPa, Unannealed, 3.20 mmASTM D648135 °C
0.45 MPa, Unannealed, 4.00 mm, 100 mm Span10ISO 75-2/Be140 °C
1.8 MPa, Unannealed, 4.00 mm, 100 mm Span10ISO 75-2/Ae130 °C
Linear coefficient of thermal expansionAcross Flow : 23 to 80°CISO 11359-29.0E-5 cm/cm/°C
Flow : -40 to 40°CASTM E8317.5E-5 cm/cm/°C
Across Flow : -40 to 40°CASTM E8317.5E-5 cm/cm/°C
Flow : 23 to 80°CISO 11359-27.0E-5 cm/cm/°C
RTIUL 746115 °C
RTI ElecUL 746110 °C
RTI ImpUL 746105 °C
thermal conductivityISO 83020.27 W/m/K
Vicat softening temperature--ISO 306/B50145 °C
--ASTM D152511155 °C
--ISO 306/A50160 °C
mechanical propertiesTest ConditionTest MethodSABIC INNOVATIVE SHANGHAI/V0150B-701
Bending modulus--6ISO 1782400 Mpa
50.0 mm Span5ASTM D7902550 Mpa
bending strength--6,7ISO 178110 Mpa
Yield, 50.0 mm Span5ASTM D790105 Mpa
elongationYieldISO 527-2/504.0 %
Yield4ASTM D6385.0 %
Break4ASTM D6387.0 %
BreakISO 527-2/5010 %
Taber abraser1000 Cycles, 1000 g, CS-17 WheelInternal Method35.0 mg
Tensile modulus--3ASTM D6382500 Mpa
--ISO 527-2/12500 Mpa
tensile strengthYieldISO 527-2/5070.0 Mpa
BreakISO 527-2/5055.0 Mpa
Break4ASTM D63860.0 Mpa
Yield4ASTM D63870.0 Mpa
Electrical performanceTest ConditionTest MethodSABIC INNOVATIVE SHANGHAI/V0150B-701
Compared to the anti leakage trace indexIEC 60112 V
Dielectric strength0.800 mm, in OilIEC 60243-133 KV/mm
1.60 mm, in OilIEC 60243-126 KV/mm
3.20 mm, in OilIEC 60243-116 KV/mm
Dissipation factor50 HzIEC 602509.0E-4
60 HzIEC 602509.0E-4
1 MHzIEC 602503.0E-3
Relative permittivity50 HzIEC 602502.80
1 MHzIEC 602502.70
60 HzIEC 602502.80
Surface resistivityIEC 60093> 1.0E+15 ohms
Volume resistivityIEC 600931.0E+15 ohms·cm
Physical propertiesTest ConditionTest MethodSABIC INNOVATIVE SHANGHAI/V0150B-701
melt mass-flow rate280°C/5.0 kgASTM D12383.5 g/10 min
Melt Volume Flow Rate (MVR)300°C/5.0 kgISO 113310.0 cm3/10min
Shrinkage rate3.20 mm，FlowInternal Method0.50 - 0.70 %
--2，FlowInternal Method0.50 - 0.70 %
Water absorption rateSaturation, 23°CISO 620.18 %
Equilibrium, 23°C, 50% RHISO 620.060 %
impact performanceTest ConditionTest MethodSABIC INNOVATIVE SHANGHAI/V0150B-701
Charpy Notched Impact Strength23°CISO 179/1eA14 kJ/m²
-30°CISO 179/1eA5.0 kJ/m²
Dart impact23°C, Total EnergyASTM D376350.0 J
flammabilityTest ConditionTest MethodSABIC INNOVATIVE SHANGHAI/V0150B-701
Burning wire flammability index1.0 mmIEC 60695-2-12960 °C
Extreme Oxygen IndexISO 4589-232 %
Hot filament ignition temperature2.0 mmIEC 60695-2-13775 °C
3.0 mmIEC 60695-2-13775 °C
1.0 mmIEC 60695-2-13775 °C
UL flame retardant rating2.0 mmUL 945VA
1.5 mmUL 94V-0
injectionTest ConditionTest MethodSABIC INNOVATIVE SHANGHAI/V0150B-701
drying temperature110 to 120 °C
drying time2.0 to 3.0 hr
Hopper temperature80 to 100 °C
Mold temperature100 to 130 °C
Processing (melt) temperature300 to 320 °C
Spray nozzle temperature280 to 300 °C
Temperature at the front of the material cylinder300 to 320 °C
Temperature at the rear of the barrel260 to 280 °C
Temperature in the middle of the barrel280 to 300 °C

Contact Us

Get App

Top