plas
Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC LV-2225Z TEIJIN JAPAN
PANLITE®
Electrical field,Electronic field,currency
Low viscosity,transparent,UV resistance
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodTEIJIN JAPAN/LV-2225Z
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B141 °C
1.8MPa,UnannealedISO 75-2/A125 °C
0.45MPaUnannealedISO 75-2/Bf141 °C
1.80MPaAnnealedISO 75-2/Af128 °C
Linear coefficient of thermal expansionTDISO 11359-27E-05 cm/cm/°C
ASTM D696/ISO 113590.7 mm/mm.℃
MDISO 11359-27E-05 cm/cm/°C
RTI Elec1.5mmUL 746125 °C
RTI Imp1.5mmUL 746115 °C
RTI Str1.5mmUL 746125 °C
Vicat softening temperatureASTM D1525/ISO R306148 ℃（℉）
ISO 306/B50148 °C
mechanical propertiesTest ConditionTest MethodTEIJIN JAPAN/LV-2225Z
Bending modulusISO 1782400 Mpa
23°CISO 1782400 Mpa
ASTM D790/ISO 178/2400 kg/cm²(MPa)[Lb/in²]
bending strengthISO 17894.0 Mpa
ASTM D790/ISO 178/94 kg/cm²(MPa)[Lb/in²]
23°CISO 17894 Mpa
Charpy Notched Impact Strength23°CISO 179/1eA71 kJ/m²
elongationASTM D638/ISO 527/6 %
Elongation at Break23°CISO 527-250 %
Nominal tensile fracture strainISO 527-2/50>50 %
Tensile modulusASTM D638/ISO 527/2400 kg/cm²(MPa)[Lb/in²]
ISO 527-2/12400 Mpa
23°CISO 527-22400 Mpa
Tensile strainYieldISO 527-2/506.0 %
tensile strengthYieldISO 527-2/5061.0 Mpa
ASTM D638/ISO 527/61 kg/cm²(MPa)[Lb/in²]
23°CISO 527-261 Mpa
Electrical performanceTest ConditionTest MethodTEIJIN JAPAN/LV-2225Z
Compared to the anti leakage trace indexIEC 60112PLC 3
Dielectric constant23°CIEC 602503.00 1MHz
1MHzIEC 602503.00
ASTM D150/IEC 602503
100HzIEC 602503.10
Dielectric strengthIEC 60243-130 KV/mm
Dissipation factor1MHzIEC 602509E-03
23°CIEC 602501E-03 100HZ
相对漏电起痕指数IEC 60112225 V
100HzIEC 602501E-03
23°CIEC 602509E-03 1MHz
Surface resistivityIEC 600931E+15 Ω.cm
IEC 60093>1.0E+15 ohms
Volume resistivityIEC 600931E+15 Ω.cm
IEC 60093>1.0E+15 ohms·cm
Physical propertiesTest ConditionTest MethodTEIJIN JAPAN/LV-2225Z
densityASTM D792/ISO 1183/1200
melt mass-flow rate300℃/1.2KgISO 113311.0 cm3/10min
Melt Volume Flow Rate (MVR)300°C/1.2kgISO 113315.0 cm3/10min
Shrinkage rateTD2.0mmISO 294-40.60 %
ASTM D9550.5-0.7 %
MD:4.00mmInternal Method0.50-0.70 %
TD:4.00mmInternal Method0.50-0.70 %
MD2.0mmISO 294-40.60 %
Water absorption rate(23°C,24hr)ISO 620.20 %
23°C,24hrISO 620.20 %
ASTM D570/ISO 620.2 %
impact performanceTest ConditionTest MethodTEIJIN JAPAN/LV-2225Z
Impact strength of simply supported beam without notch23°CISO 179NoBreak
flammabilityTest ConditionTest MethodTEIJIN JAPAN/LV-2225Z
Burning wire flammability index3.0mmIEC 60695-2-12960 °C
1.5mmIEC 60695-2-12850 °C
Hot filament ignition temperature3.0mmIEC 60695-2-13875 °C
1.5mmIEC 60695-2-13850 °C
UL flame retardant rating3.0mmUL 94V-2
UL -94V-2 1.5mm
UL -94V-2 0.40mm
UL -94V-2 0.75mm
1.5mmUL 94V-2
0.40mmUL 94V-2
UL -94V-2 3.0mm
UL -94V-2 6.0mm
optical performanceTest ConditionTest MethodTEIJIN JAPAN/LV-2225Z
Refractive indexASTM D5421.585
ISO 4891.59 °C
ASTM D542/ISO 4891.585
transmissivity3000μmASTM D100388.0 %
Transmittance rate3000μmISO 13468-288.0 %
ASTM D1003/ISO 1346888 %

Contact Us

Get App

Top