Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

Epoxy INSULCAST® 125/INSULCURE 11B ITW FORMEX
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | ITW FORMEX/INSULCAST® 125/INSULCURE 11B |
|---|---|---|---|
| Shore hardness | ShoreD | ASTM D2240 | 85 |
| thermal performance | Test Condition | Test Method | ITW FORMEX/INSULCAST® 125/INSULCURE 11B |
|---|---|---|---|
| Hot deformation temperature | HDT | 155 °C | |
| Linear coefficient of thermal expansion | MD | 4.8E-05 cm/cm/°C | |
| thermal conductivity | 0.62 W/m/K | ||
| Usage temperature | 155 °C |
| mechanical properties | Test Condition | Test Method | ITW FORMEX/INSULCAST® 125/INSULCURE 11B |
|---|---|---|---|
| bending strength | ASTM D790 | 103 MPa | |
| compressive strength | ASTM D695 | 89.6 MPa | |
| elongation | Break | ASTM D638 | 2.0 % |
| tensile strength | ASTM D638 | 79.3 MPa |
| Electrical performance | Test Condition | Test Method | ITW FORMEX/INSULCAST® 125/INSULCURE 11B |
|---|---|---|---|
| Dielectric constant | 1kHz | ASTM D150 | 4.20 |
| Dielectric strength | ASTM D149 | 17 kV/mm | |
| Dissipation factor | 1kHz | ASTM D150 | 0.020 |
| Volume resistivity | ASTM D257 | 9E+14 ohms·cm |
| Uncured Properties | Test Condition | Test Method | ITW FORMEX/INSULCAST® 125/INSULCURE 11B |
|---|---|---|---|
| Color | --2 | Amber | |
| --3 | Black | ||
| density | --3 | ASTM D1475 | 1.55 g/cm³ |
| --2 | ASTM D1475 | 0.948 g/cm³ | |
| viscosity | Pot Life6(25°C) | 150 min | |
| --2 | 0.70 Pa·s | ||
| --3 | 7.5 Pa·s | ||
| 25°C4 | 2.5 Pa·s | ||
| 固化时间5 | 3.0 hr |
| thermosetting | Test Condition | Test Method | ITW FORMEX/INSULCAST® 125/INSULCURE 11B |
|---|---|---|---|
| Thermosetting components | 按重量计算的混合比 | 100 | |
| Hardener | 按重量计算的混合比:9.0到10 | ||
| Shelf Life(25°C) | 52 wk |