Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

HDPE BPD4045 Malaysia ETILINAS
--
Insulated overhead cable
Good resistance to environmental stress cracking, wear, and thermal deformation
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | Malaysia ETILINAS/BPD4045 |
|---|---|---|---|
| Oxidation induction time (OIT) | 210℃ | ISO TR10837 | >20 min |
| Basic Performance | Test Condition | Test Method | Malaysia ETILINAS/BPD4045 |
|---|---|---|---|
| Carbon black content | IEC 811-4-1 | 2.5 % | |
| density | ISO 1183 | 952 kg/m | |
| Annealed | ISO 1872/1 | 941 kg/m | |
| melt mass-flow rate | 190℃/2.16kg | ISO 1133: Condition 4 | 0.2 g/10min |
| 190℃/5.0kg | ISO 1133: Condition 18 | 0.85 g/10min |
| thermal performance | Test Condition | Test Method | Malaysia ETILINAS/BPD4045 |
|---|---|---|---|
| Brittle temperature | ASTM D-746 | <-100 ℃ | |
| Linear coefficient of thermal expansion | ASTM D-696(20-60℃) | 1.5×10 ℃ | |
| thermal conductivity | W/m℃ | BS 874(at 23℃) 0.4 | |
| Vicat softening temperature | ISO 306 A | 120 ℃ |
| mechanical properties | Test Condition | Test Method | Malaysia ETILINAS/BPD4045 |
|---|---|---|---|
| Bending modulus | ISO 178 | 850 MPa | |
| elongation | Break | IEC 811-1-1 | >600 % |
| Environmental stress cracking resistance | F0 | ASTM D-1693B | >1000 Hours |
| Shore hardness | ISO 868 (1sec) | 62 | |
| Tensile stress | IEC 811-1-1 | 23 MPa |
| Electrical performance | Test Condition | Test Method | Malaysia ETILINAS/BPD4045 |
|---|---|---|---|
| Dielectric constant | 1 MHz | IEC 250 | 2.6 |
| Dielectric strength | IEC 243 | 20 kV/mm | |
| Dissipation factor | 1 MHz | IEC 250 | <0.001 |
| Volume resistivity | IEC 93 | >10 Ω.cm |