Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Plastomer, Ethylene-based Filter-bond™ R-36 HAPCO USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | HAPCO USA/Filter-bond™ R-36 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 24 J/m |
| Supplementary Information | Test Condition | Test Method | HAPCO USA/Filter-bond™ R-36 |
|---|---|---|---|
| CureTime | 21°C | 内部方法 | 1.0 day |
| hardness | Test Condition | Test Method | HAPCO USA/Filter-bond™ R-36 |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 80 |
| Mechanical properties | Test Condition | Test Method | HAPCO USA/Filter-bond™ R-36 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 7.5 % |
| Tensile modulus | ASTM D638 | 2000 MPa | |
| Flexural modulus | ASTM D790 | 1760 MPa | |
| tensile strength | 屈服 | ASTM D638 | 56.9 MPa |
| bending strength | ASTM D790 | 94.8 MPa |
| thermosetting | Test Condition | Test Method | HAPCO USA/Filter-bond™ R-36 |
|---|---|---|---|
| Thermosetting mixed viscosity | 25°C | ASTM D4878 | 15000to23000 cP |
| GelTime | 25°C | ASTM D2971 | 2.0 hr |
| Thermosetting components | 部件A | 按重量计算的混合比:100.按容量计算的混合比:100 | |
| 部件B | 按重量计算的混合比:50.按容量计算的混合比:46 |
| physical property | Test Condition | Test Method | HAPCO USA/Filter-bond™ R-36 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D2566 | 0.050to0.20 % |
| density | ASTM D4669 | 1.10 g/cm³ | |
| Weight Percubicinch | 18 g |
| Thermal performance | Test Condition | Test Method | HAPCO USA/Filter-bond™ R-36 |
|---|---|---|---|
| Heat distortion temperature | HDT | ASTM D648 | 7562 °C |
Contact Us
Get App
Top