Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS/PC C2950-701NSDD SABIC INNOVATIVE US
CYCOLOY™
Automotive sector、Household appliances、Electronic field、Electrical field
Flame retardant、High mobility、High impact resistance、High temperature resistan、heat-resisting
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE US/C2950-701NSDD |
|---|---|---|---|
| Instrumented dart impact energy -30 ℃ (-22 ℉) peak | ASTM D3763 | 54 J | |
| Impact strength of cantilever beam gap | 23℃ | ASTM D256 | 534 J/m |
| Instrumented dart impact energy 23 ℃ (73 ℉) total energy | ASTM D3763 | 61 J | |
| Impact strength of cantilever beam gap | 30℃ | ASTM D256 | 160 J/m |
| hardness | Test Condition | Test Method | SABIC INNOVATIVE US/C2950-701NSDD |
|---|---|---|---|
| Hardness (Rockwell R) | ASTM D785 | 123 R |
| Electrical Property | Test Condition | Test Method | SABIC INNOVATIVE US/C2950-701NSDD |
|---|---|---|---|
| Compared to the Leakage Traceability Index (CTI) | UL 746A | PLC_0 | |
| High Voltage Arc Traceability Rate (HVTR) | UL 746A | PLC 2 | |
| Volume resistivity | ASTM D257 | 100000000000000000 ohm-cm | |
| dielectric constant | ASTM D 150 | 3 | |
| High current arc ignition (HAI) | UL 746A | PLC_0 | |
| dielectric strength | in oil, 3.2 | ASTM D149 | 19.5 kV/mm |
| Surface Resistivity | ASTM D257 | 10000000000000000 Ohm | |
| Dissipation Factor | ASTM D 150 | 49 E-4 | |
| arc resistance | ASTM D495 | PLC_6 | |
| Hot wire ignition (HWI) | UL 746A | PLC_1 |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/C2950-701NSDD |
|---|---|---|---|
| tensile strength | Type I, 50，屈服 | ASTM D638 | 62 Mpa |
| elongation at break | Type I, 50 | ASTM D638 | 40 |
| bending strength | 2.6 mm/，屈服 | ASTM D790 | 102 Mpa |
| Flexural modulus | 2.6 mm/ | ASTM D790 | 2650 Mpa |
| combustibility | Test Condition | Test Method | SABIC INNOVATIVE US/C2950-701NSDD |
|---|---|---|---|
| UL fire rating V | UL 94 | 1.5 mm | |
| UL fire rating 5VB | UL 94 | 2.49 mm | |
| Limiting Oxygen Index (LOI) | ASTM D 2863 | 32 % |
| Thermal Properties | Test Condition | Test Method | SABIC INNOVATIVE US/C2950-701NSDD |
|---|---|---|---|
| RTI Imp | UL 746B | 85 °C | |
| vicat | Rate B/50 | ASTM D1525 | 85 °C |
| Linear coefficient of thermal expansion | -30°C to 3，流动 | ASTM E831 | 72 E-6/°C |
| -30°C to 3，横向 | ASTM E831 | 72 E-6/°C | |
| thermal conductivity | ASTM C 177 | 0.2 W/m-°C | |
| RTI Elec | UL 746B | 85 °C |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE US/C2950-701NSDD |
|---|---|---|---|
| Water absorption rate | 24 hours | ASTM D570 | 0.1 |
| melt mass-flow rate | ASTM D1238 | 10 g/10min | |
| Shrinkage rate | xflow, 3.2 | Internal | 0.4-0.6 |
| flow, 3.2 | Internal | 0.4-0.8 | |
| Water absorption rate | flow, 3.2 | ASTM D570 | 0.4 |
Contact Us
Get App
Top