Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPS FZ-1140-D5 DIC JAPAN
DIC.PPS
Fiber grade
High temperature resistan,Glass fiber reinforced,enhance,Flame retardant,Filler: Glass fiber reinf,40% filler by weight
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | DIC JAPAN/FZ-1140-D5 |
---|---|---|---|
Rockwell hardness | M-Scale | ASTM D785 | 100 |
R-Scale | ASTM D785 | 121 |
Basic Performance | Test Condition | Test Method | DIC JAPAN/FZ-1140-D5 |
---|---|---|---|
density | ASTM D-792 | 1.66 g/cm³ | |
Water absorption rate | ASTM D-570 | 0.02 % |
thermal performance | Test Condition | Test Method | DIC JAPAN/FZ-1140-D5 |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 265 °C |
Linear coefficient of thermal expansion | TD:-30to90°C | ASTM D696 | 2.2E-05 cm/cm/°C |
MD:-30to90°C | ASTM D696 | 2.2E-05 cm/cm/°C | |
UL flame retardant rating | UL 94 | V-0 |
mechanical properties | Test Condition | Test Method | DIC JAPAN/FZ-1140-D5 |
---|---|---|---|
Bending modulus | ASTM D790 | 13500 Mpa | |
bending strength | ASTM D790/ISO 178 | 270 kg/cm²(MPa)[Lb/in²] | |
ASTM D-790 | 270 Mpa | ||
ASTM D790 | 270 Mpa | ||
compressive strength | ASTM D695 | 200 Mpa | |
elongation | Break | ASTM D638 | 1.8 % |
Elongation at Break | ASTM D790 | 2.5 % | |
ASTM D-638 | 1.8 % | ||
ASTM D638/ISO 527 | 1.8 % | ||
Friction coefficient | Steel - Dynamic | ASTM D1894 | 0.35 |
Steel - Static | ASTM D1894 | 0.35 | |
Poisson's ratio | 0.36 | ||
Tensile modulus | ASTM D638/ISO 527 | 15000 kg/cm²(MPa)[Lb/in²] | |
ASTM D638 | 15000 Mpa | ||
ASTM D-638 | 15000 Mpa | ||
tensile strength | ASTM D638/ISO 527 | 175 kg/cm²(MPa)[Lb/in²] | |
ASTM D638 | 190 Mpa | ||
ASTM D-638 | 175 Mpa |
Electrical performance | Test Condition | Test Method | DIC JAPAN/FZ-1140-D5 |
---|---|---|---|
Arc resistance | ASTM D495 | 125 sec | |
Compared to the anti leakage trace index | ASTM D3638 | V | |
Dielectric constant | 1MHz | ASTM D150 | 4.00 |
Dielectric strength | 1.60mm | ASTM D149 | 16 KV/mm |
Dissipation factor | 1MHz | ASTM D150 | 2E-03 |
Volume resistivity | ASTM D257 | 1E+16 ohms·cm |
Physical properties | Test Condition | Test Method | DIC JAPAN/FZ-1140-D5 |
---|---|---|---|
density | ASTM D792/ISO 1183 | 1.66 | |
Shrinkage rate | MD | ASTM D955 | 0.25 % |
TD | ASTM D955 | 1.1 % | |
Water absorption rate | 23°C,24hr | ASTM D570 | 0.020 % |
ASTM D570/ISO 62 | 0.02 % |
impact performance | Test Condition | Test Method | DIC JAPAN/FZ-1140-D5 |
---|---|---|---|
Suspended wall beam without notch impact strength | ASTM D256 | 600 J/m |
flammability | Test Condition | Test Method | DIC JAPAN/FZ-1140-D5 |
---|---|---|---|
UL flame retardant rating | 0.40mm | UL 94 | V-0 |