Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
HDPE Polyethylene PE100HDC-8M Chase Plastics Services Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Chase Plastics Services Inc./Polyethylene PE100HDC-8M |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 59 J/m |
| hardness | Test Condition | Test Method | Chase Plastics Services Inc./Polyethylene PE100HDC-8M |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 65 |
| Mechanical properties | Test Condition | Test Method | Chase Plastics Services Inc./Polyethylene PE100HDC-8M |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | <600 % |
| Flexural modulus | ASTM D790 | 1280 MPa | |
| tensile strength | 屈服 | ASTM D638 | 26.9 MPa |
| physical property | Test Condition | Test Method | Chase Plastics Services Inc./Polyethylene PE100HDC-8M |
|---|---|---|---|
| melt mass-flow rate | 190°C/2.16kg | ASTM D1238 | 8.0 g/10min |
| density | ASTM D4883 | 0.953 g/cm³ |
| Thermal performance | Test Condition | Test Method | Chase Plastics Services Inc./Polyethylene PE100HDC-8M |
|---|---|---|---|
| vicat | ASTM D1525 | 128 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ASTM D648 | 77.2 °C |
| brittle temperature | ASTM D746 | <-76.1 °C |
Contact Us
Get App
Top