Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PEEK Electrafil® PEEK 11002 BK Techmer Polymer Modifiers
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PEEK 11002 BK |
---|---|---|---|
Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 75 J/m |
hardness | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PEEK 11002 BK |
---|---|---|---|
Rockwell hardness | R级 | ASTM D785 | 105 |
Mechanical properties | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PEEK 11002 BK |
---|---|---|---|
elongation | 屈服 | ASTM D638 | >3.0 % |
Flexural modulus | ASTM D790 | 2930 MPa | |
tensile strength | 屈服 | ASTM D638 | 89.6 MPa |
bending strength | ASTM D790 | 138 MPa |
Electrical performance | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PEEK 11002 BK |
---|---|---|---|
Volume resistivity | ASTM D257 | 1.0E+6到1.0E+9 ohms·cm | |
Surface Resistivity | ASTM D257 | 1.0E+6到1.0E+9 ohms |
flammability | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PEEK 11002 BK |
---|---|---|---|
UL flame retardant rating | 0.800mm | UL 94 | V-0 |
physical property | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PEEK 11002 BK |
---|---|---|---|
Water absorption rate | 24hr | ASTM D570 | 0.12 % |
density | ASTM D792 | 1.30 g/cm³ | |
Shrinkage rate | MD:3.18mm | ASTM D955 | 1.6 % |
Thermal performance | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PEEK 11002 BK |
---|---|---|---|
Heat distortion temperature | 1.8MPa,未退火,HDT | ASTM D648 | 160 °C |
0.45MPa,未退火,HDT | ASTM D648 | 299 °C | |
Linear coefficient of thermal expansion | MD | ASTM D696 | 5.6E-05 cm/cm/°C |
Contact Us
Get App
Top