Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS LG GF10 UV BK USA TPC
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | USA TPC/LG GF10 UV BK |
|---|---|---|---|
| tensile strength | 屈服 | ASTM D-638 | 44.8 MPa |
| Impact strength of cantilever beam gap | 3.18mm | ASTM D-256 | 64.1 J/m |
| bending strength | ASTM D-790 | 84.8 MPa | |
| Suspended wall beam without notch impact strength | 3.18mm | ASTM D-256 | 320 J/m |
| elongation at break | ASTM D-638 | 3.0 % | |
| Flexural modulus | ASTM D-790 | 3620 MPa |
| Electrical performance | Test Condition | Test Method | USA TPC/LG GF10 UV BK |
|---|---|---|---|
| dielectric strength | ASTM D-149 | 19 KV/mm | |
| Volume resistivity | ASTM D-257 | 1E+14 ohm.cm |
| physical property | Test Condition | Test Method | USA TPC/LG GF10 UV BK |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D-570 | 0.16 % |
| density | ASTM D-792 | 1.11 g/cm3 | |
| Shrinkage rate | Flow(3.18mm) | ASTM D-955 | 0.35 % |
| Thermal performance | Test Condition | Test Method | USA TPC/LG GF10 UV BK |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa，未退火，HDT | ASTM D-648 | 102 ℃ |
| Linear coefficient of thermal expansion | Flow | ASTM D-969 | 0.000041 cm/cm/℃ |
| UL flame retardant rating | 1.50mm | UL 94 | HB |
| Heat distortion temperature | 1.80MPa，未退火，HDT | ASTM D-648 | 96.1 ℃ |
Contact Us
Get App
Top