Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP RIALFLAME H V0S 07 HW 30 G RIALTI ITALY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodRIALTI ITALY/RIALFLAME H V0S 07 HW 30 G
Impact strength of cantilever beam gap-20°CISO 180/1A8.0 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU30 kJ/m²
Impact strength of cantilever beam gap23°CISO 180/1A9.0 kJ/m²
hardnessTest ConditionTest MethodRIALTI ITALY/RIALFLAME H V0S 07 HW 30 G
Shore hardness邵氏D,15秒ISO 86882
Mechanical propertiesTest ConditionTest MethodRIALTI ITALY/RIALFLAME H V0S 07 HW 30 G
Flexural modulus23°CISO 1788000 MPa
tensile strength 断裂,23°CISO 527-2/2075.0 MPa
Tensile strain断裂,23°CISO 527-2/206.0 %
bending strength23°CISO 178110 MPa
flammabilityTest ConditionTest MethodRIALTI ITALY/RIALFLAME H V0S 07 HW 30 G
Hot filament ignition temperature2.0mmIEC 60695-2-13800 °C
UL flame retardant rating3.0mmUL 94V-0
Burning wire flammability index1.0mmIEC 60695-2-12960 °C
Limiting Oxygen IndexISO 4589-230 %
UL flame retardant rating0.8mmUL 94V-0
1.5mmUL 94V-0
Burning wire flammability index2.0mmIEC 60695-2-12960 °C
4.0mmIEC 60695-2-12960 °C
UL flame retardant rating2.00mmIEC 60695-2-2Pass
physical property Test ConditionTest MethodRIALTI ITALY/RIALFLAME H V0S 07 HW 30 G
Shrinkage rateTDISO 294-40.80 %
MDISO 294-40.40 %
ash contentISO 345130 %
densityISO 11831.44 g/cm³
melt mass-flow rate230°C/2.16kgISO 11338.0 g/10min
agingTest ConditionTest MethodRIALTI ITALY/RIALFLAME H V0S 07 HW 30 G
Accelerated oven aging150°CISO 457716.7 day
Thermal performanceTest ConditionTest MethodRIALTI ITALY/RIALFLAME H V0S 07 HW 30 G
ball-indentation hardness125°CIEC 335通过
vicatISO 306/B50130 °C
Heat distortion temperature1.8MPa,未退火，HDTISO 75-2/A145 °C

Contact Us

Get App

Top