Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

MPR 2380 BK USA Advanced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | USA Advanced/ 2380 BK |
---|---|---|---|
Shore hardness | 邵氏A | ISO 868 | 79 |
邵氏A | ASTM D2240 | 79 |
physical property | Test Condition | Test Method | USA Advanced/ 2380 BK |
---|---|---|---|
density | ASTM D792 | 1.16 g/cm³ | |
ISO 1183 | 1.16 g/cm³ | ||
Apparent viscosity | 190°C,300sec^-1 | ASTM D3835 | 630 Pa·s |
elastomer | Test Condition | Test Method | USA Advanced/ 2380 BK |
---|---|---|---|
elongation | 断裂 | ASTM D412 | 550 % |
tensile strength | 100%应变 | ISO 37 | 4.69 MPa |
屈服 | ASTM D412 | 11.0 MPa | |
compression set | 100°C,22hr | ASTM D395A | 70 % |
24°C,22hr | ASTM D395A | 21 % | |
elongation | 断裂 | ISO 37 | 550 % |
tensile strength | 屈服 | ISO 37 | 11.0 MPa |
tear strength | 24°C | ASTM D624 | 40.3 kN/m |
compression set | 100°C,22hr | ISO 815 | 70 % |
tear strength | 24°C | ISO 34-1 | 40 kN/m |
compression set | 24°C,22hr | ISO 815 | 21 % |
tensile strength | 100%应变 | ASTM D412 | 4.69 MPa |
Stretch permanent deformation | ASTM D412 | 13 % |
aging | Test Condition | Test Method | USA Advanced/ 2380 BK |
---|---|---|---|
volume change | 100°C,168hr,在水中 | ASTM D471 | -10 % |
Change rate of tensile strength in air | 125°C,168hr | ISO 188 | 96 % |
volume change | 100°C,57120hr,inIRM903Oil#3 | ISO 1817 | 29 % |
Change rate of tensile strength in air | 100%Strain,125°C,168hr | ASTM D573 | 83 % |
volume change | 100°C,168hr,inIRM903Oil#3 | ASTM D471 | 29 % |
100°C,168hr,inASTM#1Oil | ASTM D471 | 17 % | |
100°C,168hr,inASTM#1Oil | ISO 1817 | 17 % | |
100°C,168hr,在水中 | ISO 1817 | -10 % | |
Change rate of tensile strength in air | 125°C,168hr | ASTM D573 | 96 % |
100%应变125°C,168hr | ISO 188 | 83 % |
Contact Us
Get App
Top