plas
Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC/ABS MB-1800 MITSUBISHI ENGINEERING JAPAN
IUPILON™ 
Electronic and Electrical Applications,Shell
High mobility
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/MB-1800
Combustibility (rate)UL 94V-0(1.2mm)
Hot deformation temperatureHDTASTM D648/ISO 7589 ℃（℉）
0.45MPa,UnannealedISO 75-2/B89.0 °C
1.8MPa,UnannealedISO 75-2/A81.0 °C
Linear coefficient of thermal expansionASTM D696/ISO 11359- mm/mm.℃
mechanical propertiesTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/MB-1800
Bending modulusISO 1782800 Mpa
ASTM D790/ISO 1782800 kg/cm²(MPa)[Lb/in²]
bending strengthASTM D790/ISO 17895 kg/cm²(MPa)[Lb/in²]
ISO 17895.0 Mpa
elongationASTM D638/ISO 52760 %
Elongation at BreakASTM D638/ISO 5274.0 %
Nominal tensile fracture strainISO 527-292 %
Tensile modulusASTM D638/ISO 5272800 kg/cm²(MPa)[Lb/in²]
ISO 527-22800 Mpa
Tensile strainYieldISO 527-24.0 %
tensile strengthYieldISO 527-260.0 Mpa
Physical propertiesTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/MB-1800
densityASTM D792/ISO 11831.18
melt mass-flow rateASTM D1238/ISO 113314 g/10min
260°C/2.16kgISO 113314 g/10min
Melt Volume Flow Rate (MVR)260°C/2.16kgISO 113314.0 cm3/10min
Shrinkage rateASTM D9550.3-0.5 %
MD:3.20mm0.30-0.50 %
TD:3.20mm0.30-0.50 %
Water absorption rateSaturation,23°CISO 620.20 %
ASTM D570/ISO 620.2 %
impact performanceTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/MB-1800
Impact strength of simply supported beam without notch23°CISO 179NoBreak
flammabilityTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/MB-1800
UL flame retardant rating2.0mmUL 945VB
1.2mmUL 94V-0

Contact Us

Get App

Top