Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC EXL9335 SABIC INNOVATIVE US
LEXAN™
Electronic and Electrical、Aerospace Applications、lens
High mobility、Ductility at low temperat、Short molding cycle
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Thermal Properties | Test Condition | Test Method | SABIC INNOVATIVE US/EXL9335 |
|---|---|---|---|
| RTIElec | UL746 | 125 °C | |
| Heat Deflection Temperature | 1.8MPa,Unannealed,64.0mmSpan | ISO75-2/Af | 126 °C |
| Vicat Softening Temperature | -- | ISO306/B50 | 145 °C |
| Ball PressureTest | 125°C | IEC60695-10-2 | Pass |
| Heat Deflection Temperature | 0.45MPa,未退火,3.20mm | ASTMD648 | 139 °C |
| Vicat Softening Temperature | ASTMD152511 | 147 °C | |
| Heat Deflection Temperature | 0.45MPa,Unannealed,100mmSpan | ISO75-2/Be | 139 °C |
| RTIStr | UL746 | 125 °C | |
| Heat Deflection Temperature | 1.8MPa,未退火,3.20mm | ASTMD648 | 126 °C |
| Evolution Calendar intelligent importer | UL746 | 110 °C | |
| Vicat Softening Temperature | -- | ISO306/B120 | 147 °C |
| Mechanical Properties | Test Condition | Test Method | SABIC INNOVATIVE US/EXL9335 |
|---|---|---|---|
| Flexural Modulus | 50.0mm跨距 | ASTMD790 | 2150 Mpa |
| Tensile Stress | 断裂 | ISO527-2/50 | 58.0 Mpa |
| Tensile Elongation | 断裂 | ASTMD638 | 100 % |
| Tensile Strain | 断裂 | ISO527-2/50 | 100 % |
| Tensile Modulus | ISO527-2/1 | 2150 Mpa | |
| Tensile Strength | 屈服 | ASTMD638 | 59.0 Mpa |
| Flexural Modulus | ISO178 | 2150 Mpa | |
| Flexural Strength | 屈服,50.0mm跨距 | ASTMD790 | 86.0 Mpa |
| Tensile Elongation | 屈服 | ASTMD638 | 6.0 % |
| Tensile Stress | 屈服 | ISO527-2/50 | 59.0 Mpa |
| Tensile Strain | 屈服 | ISO527-2/50 | 6.0 % |
| Flexural Strength | ISO178 | 86.0 Mpa | |
| Tensile Modulus | ASTMD638 | 2150 Mpa | |
| Tensile Strength | 断裂 | ASTMD638 | 58.0 Mpa |
| Physical | Test Condition | Test Method | SABIC INNOVATIVE US/EXL9335 |
|---|---|---|---|
| Density / Specific Gravity | ISO1183 | 1.24 g/cm³ | |
| Moisture Absorption | 平衡,23°C,50%RH | ISO62 | 0.050 % |
| Density / Specific Gravity | ASTMD792 | 1.24 g/cm³ | |
| Modeling Shrinkage | MD：3.20mm | 内部方法 | 0.40to0.80 % |
| Melt Mass-Flow Rate | 300°C/1.2kg | ASTMD1238 | 8.0 g/10min |
| Outdoor Suitability | UL746C | f1 | |
| Modeling Shrinkage | TD：3.20mm | 内部方法 | 0.40to0.80 % |
| Melt Volume flow Rate | 300°C/1.2kg | ISO1133 | 7.00 cm3/10min |
| Moisture Absorption | 饱和,23°C | ISO62 | 0.12 % |
| Impact Properties | Test Condition | Test Method | SABIC INNOVATIVE US/EXL9335 |
|---|---|---|---|
| Notched Izod Impact Strength | -30°C | ISO180/1A | 50 kJ/m² |
| Charpy Unnotched Impact Strength | -30°C | ISO179/1eU | NoBreak |
| Unnotched Izod Impact Strength | -30°C | ISO180/1U | NoBreak |
| Charpy Notched Impact Strength | -30°C | ISO179/1eA | 50 kJ/m² |
| 23°C | ISO179/1eA | 70 kJ/m² | |
| Charpy Unnotched Impact Strength | 23°C | ISO179/1eU | NoBreak |
| Unnotched Izod Impact Strength | 23°C | ISO180/1U | NoBreak |
| Notched Izod Impact Strength | 23°C | ISO180/1A | 75 kJ/m² |
| Flammability | Test Condition | Test Method | SABIC INNOVATIVE US/EXL9335 |
|---|---|---|---|
| Glow Wire Ignition Temperature | 1.0mm | IEC60695-2-13 | 900 °C |
| GlowWireFlammability | 1.9mm | IEC60695-2-12 | 960 °C |
| Flame Rating | 0.8mm | UL94 | V-0 |
| 2.5mm | UL94 | 5VA | |
| 2.0mm | UL94 | 5VB |
| Electrical Properties | Test Condition | Test Method | SABIC INNOVATIVE US/EXL9335 |
|---|---|---|---|
| High Amp Arc Ignition | HAI | UL746 | PLC 0 |
| Comparative Tracking Index | IEC60112 | 250 V | |
| Hot-wire Ignition | HWI | UL746 | PLC 2 |
| Comparative Tracking Index | CTI | UL746 | PLC 2 |
Contact Us
Get App
Top