Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC Hylex® P1017L2 ENTEC USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ENTEC USA/Hylex® P1017L2 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 860 J/m |
| Mechanical properties | Test Condition | Test Method | ENTEC USA/Hylex® P1017L2 |
|---|---|---|---|
| bending strength | 23°C | ASTM D790 | 91.0 MPa |
| Flexural modulus | 23°C | ASTM D790 | 2230 MPa |
| tensile strength | 屈服,23°C | ASTM D638 | 66.7 MPa |
| elongation | 断裂,23°C | ASTM D638 | 120 % |
| flammability | Test Condition | Test Method | ENTEC USA/Hylex® P1017L2 |
|---|---|---|---|
| UL flame retardant rating | 3.0mm | UL 94 | V-2 |
| 1.5mm | UL 94 | V-2 |
| physical property | Test Condition | Test Method | ENTEC USA/Hylex® P1017L2 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.50to0.70 % |
| Water absorption rate | 24hr | ASTM D570 | 0.15 % |
| density | ASTM D792 | 1.20 g/cm³ | |
| melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 17 g/10min |
| Thermal performance | Test Condition | Test Method | ENTEC USA/Hylex® P1017L2 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 134 °C |
Contact Us
Get App
Top