Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Unspecified TechnoFin PP GF 30 TECHNOCOMPOUND GERMANY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoFin PP GF 30 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 6.8 kJ/m² |
| -30°C | ISO 179/1eA | 5.9 kJ/m² | |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 39 kJ/m² |
| -30°C | ISO 179/1eU | 29 kJ/m² |
| hardness | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoFin PP GF 30 |
|---|---|---|---|
| ball-indentation hardness | ISO 2039-1 | 64.0 MPa |
| Mechanical properties | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoFin PP GF 30 |
|---|---|---|---|
| tensile strength | 断裂 | ISO 527-2/5 | 69.0 MPa |
| Tensile strain | 断裂 | ISO 527-2/5 | 2.8 % |
| Flexural modulus | ISO 178 | 5800 MPa | |
| Tensile modulus | ISO 527-2/1 | 5200 MPa | |
| Tensile strain | 屈服 | ISO 527-2/50 | 2.5 % |
| tensile strength | 屈服 | ISO 527-2/50 | 60.0 MPa |
| bending strength | ISO 178 | 90.0 MPa |
| Electrical performance | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoFin PP GF 30 |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | 1E+13 ohms |
| physical property | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoFin PP GF 30 |
|---|---|---|---|
| density | ISO 1183 | 1.13 g/cm³ | |
| Melt volume flow rate | 230°C/2.16kg | ISO 1133 | 22.0 cm³/10min |
| Thermal performance | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoFin PP GF 30 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 159 °C |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 141 °C |
Contact Us
Get App
Top