Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC G-3115PH BK TEIJIN JAPAN
PANLITE®
Casters、Electrical applications、Mechanical parts with req、electrical equipment、Electronic components
High rigidity、enhance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | TEIJIN JAPAN/G-3115PH BK |
|---|---|---|---|
| Water absorption rate | 24hr,23℃ | ASTM D-570 | 0.15 % |
| Mechanical properties | Test Condition | Test Method | TEIJIN JAPAN/G-3115PH BK |
|---|---|---|---|
| Tensile modulus | ASTM D-638 | 5000(51000) MPa(Kgf/cm | |
| Impact strength value | 艾氏、带缺口厚度3.2mm | ASTM D-256 | 120(12) J/m(kgf·cm/cm) |
| Rockwell hardness | ASTM D-785 | 90 M标度 | |
| bending strength | ASTM D-790 | 142(1450) MPa(Kgf/cm | |
| elongation | 断裂 | ASTM D-638 | 5 |
| Flexural modulus | ASTM D-790 | 4410(45000) MPa(Kgf/cm | |
| compressive strength | ASTM D-695 | 120(1220) MPa(Kgf/cm | |
| tensile strength | 断裂点 | ASTM D-638 | 94(960) |
| Impact strength value | 艾氏、带缺口厚度6.4mm | ASTM D-256 | 120(12) J/m(kgf·cm/cm) |
| Electrical performance | Test Condition | Test Method | TEIJIN JAPAN/G-3115PH BK |
|---|---|---|---|
| Volume resistivity | ASTM D-257 | 1 | |
| Dielectric tangent | 60Hz | ASTM D-150 | 0.0008 |
| permittivity | 60Hz | ASTM D-150 | 3.32 |
| dielectric breakdown strength | 快速加压值厚度1.6mm | ASTM D-149 | 30 KV/mm |
| arc resistance | ASTM D-495 | 100 sec | |
| Conductive Track Resistance (CTI) | IEC 112 | 175 V | |
| permittivity | 10 | ASTM D-150 | 3.23 |
| Dielectric tangent | 10 | ASTM D-150 | 0.009 |
| processability | Test Condition | Test Method | TEIJIN JAPAN/G-3115PH BK |
|---|---|---|---|
| Shrinkage rate | 垂直方向 | ASTM D-955 | 0.4～0.6 % |
| 流动方向 | ASTM D-955 | 0.2～0.4 % |
| physical property | Test Condition | Test Method | TEIJIN JAPAN/G-3115PH BK |
|---|---|---|---|
| transmittance | 厚度3mm | ASTM D-1003 | 半透明 % |
| Thermal performance | Test Condition | Test Method | TEIJIN JAPAN/G-3115PH BK |
|---|---|---|---|
| linear expansion coefficient | 流动方向 | ASTM D-696 | 3.2 |
| 冲击式，厚度1.47mm | UL 746B | 125 °C | |
| 非冲击式，厚度1.47mm | UL 746B | 130 °C | |
| Load deflection temperature | 负荷1.813MPa(18.6kgf/cm) | ASTM D-648 | 147 °C |
| linear expansion coefficient | 垂直方向 | ASTM D-696 | 6.5 |
| Load deflection temperature | 负荷0.451MPa(4.6kgf/cm) | ASTM D-648 | 150 °C |
| 电学式，厚度1.47mm | UL 746B | 130 °C |
Contact Us
Get App
Top