Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 7022IRF SINOPEC-MITSUBISH BEIJING
Novarex™
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Electrical performance | Test Condition | Test Method | SINOPEC-MITSUBISH BEIJING/7022IRF |
|---|---|---|---|
| Surface Resistivity | ASTM D257/IEC 60093 | 6E+15 Ω | |
| dielectric constant | ASTM D150/IEC 60250 | 3.1 | |
| Dielectric loss | ASTM D150/IEC 60250 | 0.0006 | |
| Volume resistivity | ASTM D257/IEC 60093 | 3E+14 Ω.cm |
| Mechanical properties | Test Condition | Test Method | SINOPEC-MITSUBISH BEIJING/7022IRF |
|---|---|---|---|
| bending strength | ASTM D790/ISO 178 | 93 kg/cm²(MPa)[Lb/in²] | |
| Flexural modulus | ASTM D790/ISO 178 | 2300 kg/cm²(MPa)[Lb/in²] | |
| Tensile modulus | ASTM D638/ISO 527 | 2400 kg/cm²(MPa)[Lb/in²] | |
| elongation at break | ASTM D638/ISO 527 | 140 % | |
| tensile strength | ASTM D638/ISO 527 | 60 kg/cm²(MPa)[Lb/in²] |
| other | Test Condition | Test Method | SINOPEC-MITSUBISH BEIJING/7022IRF |
|---|---|---|---|
| characteristic | 通过FDA认证.低粘度 | ||
| Color | 白底 | ||
| purpose | 注塑成型.高流动 |
| Physical properties | Test Condition | Test Method | SINOPEC-MITSUBISH BEIJING/7022IRF |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.5-0.7 % | |
| density | ASTM D792/ISO 1183 | 1.2 | |
| melt mass-flow rate | ASTM D1238/ISO 1133 | 14 g/10min | |
| Water absorption rate | ASTM D570/ISO 62 | 0.24 % |
| processability | Test Condition | Test Method | SINOPEC-MITSUBISH BEIJING/7022IRF |
|---|---|---|---|
| process temperature | 270-290 °C | ||
| pressure | 50-150 Mpa | ||
| Dry conditions | 120℃.约4-8小时 | ||
| screw speed | 50-100 rpm | ||
| Temperature | 70-100 °C |
| Thermal performance | Test Condition | Test Method | SINOPEC-MITSUBISH BEIJING/7022IRF |
|---|---|---|---|
| Heat distortion temperature | HDT | ASTM D648/ISO 75 | 124 ℃（℉） |
Contact Us
Get App
Top