Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC LS-4210 TEIJIN JAPAN
PANLITE®
Fitness equipment,household electrical appliances
High rigidity,High mobility
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | TEIJIN JAPAN/LS-4210 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179 | No Break | |
| Charpy Notched Impact Strength | ISO 179 | 25 kJ/m² |
| Mechanical properties | Test Condition | Test Method | TEIJIN JAPAN/LS-4210 |
|---|---|---|---|
| Tensile modulus | ISO 527-1-2 | 2400 Mpa | |
| tensile strength | 屈服 | ISO 527-2/50 | 50 Mpa |
| bending strength | ISO 178 | 80 Mpa | |
| Flexural modulus | ISO 178 | 2200 Mpa | |
| Tensile strain | 断裂 | ISO 527-2/50 | 110 % |
| 屈服 | ISO 527-2/50 | 6 % | |
| tensile strength | 断裂 | ISO 527-2/50 | 50 Mpa |
| Electrical performance | Test Condition | Test Method | TEIJIN JAPAN/LS-4210 |
|---|---|---|---|
| relative permittivity | 100 Hz | IEC 60250 | 3 |
| Dissipation Factor | 1 MHz | IEC 60250 | 0.009 |
| dielectric strength | IEC 60243-1 | 32 KV/mm | |
| Volume resistivity | IEC 60093 | > 1.0E+15 ohms·cm | |
| Dissipation Factor | 100 Hz | IEC 60250 | 0.001 |
| relative permittivity | 1 MHz | IEC 60250 | 3 |
| Surface Resistivity | IEC 60093 | > 1.0E+15 ohms | |
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | V |
| Flame retardant performance | Test Condition | Test Method | TEIJIN JAPAN/LS-4210 |
|---|---|---|---|
| UL flame retardant rating | 1.50 mm | UL 94 | V-2 |
| physical property | Test Condition | Test Method | TEIJIN JAPAN/LS-4210 |
|---|---|---|---|
| Shrinkage rate | MD：4.0 mm | 内部方法 | 0.50 - 0.70 % |
| density | ISO 1183 | 1.26 g/cm³ | |
| Water absorption rate | 23℃，24hr | ISO 62 | 0.17 % |
| Shrinkage rate | TD：4.0 mm | 内部方法 | 0.50 - 0.70 % |
| Thermal performance | Test Condition | Test Method | TEIJIN JAPAN/LS-4210 |
|---|---|---|---|
| vicat | B50 | ISO 306 | 141 °C |
| Relative Heat Index (RTI) | 电气性能，1.50 mm | UL 746 | 115 °C |
| Heat distortion temperature | 1.8 MPa，未退火，HDT | ISO 75-2/A | 130 °C |
| Relative Heat Index (RTI) | 冲击机械性能，1.50 mm | UL 746 | 105 °C |
| Heat distortion temperature | 0.45 MPa，未退火，HDT | ISO 75-2/B | 139 °C |
| Linear coefficient of thermal expansion | TD | ISO 11359-2 | 0.000070 1/℃ |
| Relative Heat Index (RTI) | 强度机械性能，1.50 mm | UL 746 | 105 °C |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 0.000070 1/℃ |
Contact Us
Get App
Top