Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

POM AT342 OTSUKAC JAPAN
POTICON
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | OTSUKAC JAPAN/AT342 |
|---|---|---|---|
| Rockwell hardness | M-Scale | ASTM D785 | 74 |
| thermal performance | Test Condition | Test Method | OTSUKAC JAPAN/AT342 |
|---|---|---|---|
| Heat Distortion | ASTM D648 | 147 °C | |
| Linear coefficient of thermal expansion | Flow | ASTM D696 | 3.8E-5 cm/cm/°C |
| mechanical properties | Test Condition | Test Method | OTSUKAC JAPAN/AT342 |
|---|---|---|---|
| Bending modulus | ASTM D790 | 6100 Mpa | |
| bending strength | ASTM D790 | 121 Mpa | |
| elongation | Break | ASTM D638 | 3.3 % |
| Friction coefficient | 与钢 - 动态 | 0.20 | |
| tensile strength | ASTM D638 | 82.0 Mpa | |
| Wear amount | of counterpart 4 | 0.00 10^-3 mm³/N·km | |
| --3 | 1.30 10^-3 mm³/N·km |
| Physical properties | Test Condition | Test Method | OTSUKAC JAPAN/AT342 |
|---|---|---|---|
| Shrinkage rate | Across FlowFlow | 1.9 % | |
| Flow | 1.2 % | ||
| Water absorption rate | Equilibrium | ASTM D570 | 0.20 % |
| flammability | Test Condition | Test Method | OTSUKAC JAPAN/AT342 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |
| injection | Test Condition | Test Method | OTSUKAC JAPAN/AT342 |
|---|---|---|---|
| Injection pressure | 70.0 to 100 Mpa | ||
| Mold temperature | 60 to 100 °C | ||
| Processing (melt) temperature | 185 to 215 °C |