Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPA HTV-4H1 9205 EMS-CHEMIE SWITZERLAND
Grivory®
Automotive components,Sports equipment
enhance,Thermal stability,High temperature resistan
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/HTV-4H1 9205 |
---|---|---|---|
Ball Pressure Test | ISO 2039-1 | 310 Mpa |
thermal performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/HTV-4H1 9205 |
---|---|---|---|
Continuous use temperature | --3 | ISO 2578 | 150 °C |
--4 | Internal Method | 270 °C | |
Hot deformation temperature | 8.0 MPa, Unannealed | ISO 75-2/C | 200 °C |
1.8 MPa, Unannealed | ISO 75-2/A | 280 °C | |
Linear coefficient of thermal expansion | Across Flow | ISO 11359-2 | 5.0E-5 cm/cm/°C |
Flow | ISO 11359-2 | 1.5E-5 cm/cm/°C | |
Melting temperature | ISO 11357-3 | 325 °C |
mechanical properties | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/HTV-4H1 9205 |
---|---|---|---|
Tensile modulus | ISO 527-2 | 14500 Mpa | |
Tensile strain | Break | ISO 527-2 | 2.0 % |
tensile strength | Break | ISO 527-2 | 220 Mpa |
Electrical performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/HTV-4H1 9205 |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | V | |
Dielectric strength | IEC 60243-1 | 30 KV/mm | |
Surface resistivity | IEC 60093 | -- ohms | |
Volume resistivity | IEC 60093 | 1.0E+13 ohms·cm |
Physical properties | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/HTV-4H1 9205 |
---|---|---|---|
density | ISO 1183 | 1.53 g/cm³ | |
Shrinkage rate | 横向Flow | ISO 294-4 | 0.70 % |
Flow | ISO 294-4 | 0.10 % | |
Water absorption rate | Saturation, 23°C | ISO 62 | 3.5 % |
Equilibrium, 23°C, 50% RH | ISO 62 | 1.5 % |
impact performance | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/HTV-4H1 9205 |
---|---|---|---|
Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 8.0 kJ/m² |
-30°C | ISO 179/1eA | 8.0 kJ/m² | |
Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 70 kJ/m² |
23°C | ISO 179/1eU | 70 kJ/m² |
flammability | Test Condition | Test Method | EMS-CHEMIE SWITZERLAND/HTV-4H1 9205 |
---|---|---|---|
Flammability level | UL 94 | HB | |
ISO Type | ISO 1874 | PA 6T/6I. MH. 12-140. GF40 |