Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
BOC INFUSE™ 9100 DOW USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | DOW USA/INFUSE™ 9100 |
|---|---|---|---|
| Shore hardness | 邵氏A,模压成型 | ASTM D2240 | 75 |
| Mechanical properties | Test Condition | Test Method | DOW USA/INFUSE™ 9100 |
|---|---|---|---|
| Flexural modulus | 模压成型 | ASTM D790 | 19.1 MPa |
| Tensile modulus | 模压成型 | ASTM D638 | 2.79 MPa |
| elongation | 断裂,模压成型 | ASTM D638 | 480 % |
| tensile strength | 断裂,模压成型 | ASTM D638 | 6.60 MPa |
| elastomer | Test Condition | Test Method | DOW USA/INFUSE™ 9100 |
|---|---|---|---|
| elongation | 断裂 | ASTM D412 | 1300 % |
| tensile strength | 断裂 | ASTM D412 | 13.0 MPa |
| compression set | 70°C | ASTM D395 | 47 % |
| tear strength | ASTM D624 | 40.0 kN/m | |
| compression set | 21°C | ASTM D395 | 19 % |
| physical property | Test Condition | Test Method | DOW USA/INFUSE™ 9100 |
|---|---|---|---|
| density | ASTM D792 | 0.877 g/cm³ | |
| melt mass-flow rate | 190°C/2.16kg | ASTM D1238 | 1.0 g/10min |
| Thermal performance | Test Condition | Test Method | DOW USA/INFUSE™ 9100 |
|---|---|---|---|
| melting temperature | 内部方法 | 120 °C | |
| TMA | 1.00mm | 内部方法 | 114 °C |
Contact Us
Get App
Top