Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPS FZ-3805-S3 DIC JAPAN
DIC.PPS
--
Filler: Glass mineral
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | DIC JAPAN/FZ-3805-S3 |
|---|---|---|---|
| Rockwell hardness | M-Scale | ASTM D785 | 100 |
| R-Scale | ASTM D785 | 121 |
| thermal performance | Test Condition | Test Method | DIC JAPAN/FZ-3805-S3 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 265 °C |
| Linear coefficient of thermal expansion | TD:-30to90°C | ASTM D696 | 1.8E-05 cm/cm/°C |
| MD:-30to90°C | ASTM D696 | 1.8E-05 cm/cm/°C |
| mechanical properties | Test Condition | Test Method | DIC JAPAN/FZ-3805-S3 |
|---|---|---|---|
| Bending modulus | ASTM D790 | 18000 Mpa | |
| bending strength | ASTM D790 | 200 Mpa | |
| compressive strength | ASTM D695 | 160 Mpa | |
| elongation | Break | ASTM D638 | 1.2 % |
| Elongation at Break | ASTM D790 | 1.4 % | |
| Friction coefficient | Steel - Dynamic | ASTM D1894 | 0.35 |
| Steel - Static | ASTM D1894 | 0.35 | |
| Poisson's ratio | 0.40 | ||
| Tensile modulus | ASTM D638 | 19000 Mpa | |
| tensile strength | ASTM D638 | 125 Mpa |
| Electrical performance | Test Condition | Test Method | DIC JAPAN/FZ-3805-S3 |
|---|---|---|---|
| Dielectric constant | 1MHz | ASTM D150 | 4.00 |
| Dielectric strength | 1.60mm | ASTM D149 | 16 KV/mm |
| Dissipation factor | 1MHz | ASTM D150 | 5E-03 |
| Volume resistivity | ASTM D257 | 1E+16 ohms·cm |
| other | Test Condition | Test Method | DIC JAPAN/FZ-3805-S3 |
|---|---|---|---|
| characteristic | GF增强 | ||
| purpose | IT办公 电器 |
| Physical properties | Test Condition | Test Method | DIC JAPAN/FZ-3805-S3 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.25 % |
| TD | ASTM D955 | 0.77 % | |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.020 % |
| impact performance | Test Condition | Test Method | DIC JAPAN/FZ-3805-S3 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ASTM D256 | 240 J/m |
| flammability | Test Condition | Test Method | DIC JAPAN/FZ-3805-S3 |
|---|---|---|---|
| UL flame retardant rating | 0.8mm | UL 94 | V-0 |