Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PP FB51 HANWHA TOTAL KOREA
--
Electronic field,Electrical field
Flame retardant,heat-resisting,High mobility
ULTDS
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | HANWHA TOTAL KOREA/FB51 |
|---|---|---|---|
| Rockwell hardness | R-Scale | ASTM D785 | 90 |
| thermal performance | Test Condition | Test Method | HANWHA TOTAL KOREA/FB51 |
|---|---|---|---|
| Hot deformation temperature | 0.45MPa,Unannealed | ASTM D648 | 120 °C |
| mechanical properties | Test Condition | Test Method | HANWHA TOTAL KOREA/FB51 |
|---|---|---|---|
| Bending modulus | ASTM D790 | 1470 Mpa | |
| elongation | Break | ASTM D638 | 200 % |
| tensile strength | Yield | ASTM D638 | 29.4 Mpa |
| Physical properties | Test Condition | Test Method | HANWHA TOTAL KOREA/FB51 |
|---|---|---|---|
| density | ASTM D792 | 0.930 g/cm³ | |
| melt mass-flow rate | 230°C/2.16kg | ASTM D1238 | 8.0 g/10min |
| Shrinkage rate | MD:2.00mm | ASTM D955 | 1.5to1.9 % |
| impact performance | Test Condition | Test Method | HANWHA TOTAL KOREA/FB51 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 69 J/m |
| flammability | Test Condition | Test Method | HANWHA TOTAL KOREA/FB51 |
|---|---|---|---|
| UL flame retardant rating | 0.80mm | UL 94 | V-2 |
| injection | Test Condition | Test Method | HANWHA TOTAL KOREA/FB51 |
|---|---|---|---|
| Back pressure | 0.490 到 1.96 Mpa | ||
| Injection pressure | 39.2 到 78.5 Mpa | ||
| Mold temperature | 40 到 70 °C | ||
| Spray nozzle temperature | 190 到 210 °C | ||
| Temperature at the front of the material cylinder | 180 到 200 °C | ||
| Temperature at the rear of the barrel | 170 到 180 °C | ||
| Temperature in the middle of the barrel | 180 到 200 °C |