Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PBT 5010G-30 MITSUBISHI ENGINEERING JAPAN
NOVADURAN™
Bottle cap,Fitness equipment,Automotive sector,Electronic field,Electrical field
Glass fiber reinforced
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/5010G-30 |
---|---|---|---|
Combustibility (rate) | UL 94 | HB | |
Hot deformation temperature | HDT | ASTM D648/ISO 75 | 220 ℃(℉) |
Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 3.E-05 mm/mm.℃ | |
Melting temperature | 224 ℃(℉) |
mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/5010G-30 |
---|---|---|---|
Bending modulus | ASTM D790/ISO 178 | 8900 kg/cm²(MPa)[Lb/in²] | |
bending strength | ASTM D790/ISO 178 | 210 kg/cm²(MPa)[Lb/in²] | |
Tensile modulus | ASTM D638/ISO 527 | 9500 kg/cm²(MPa)[Lb/in²] |
Electrical performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/5010G-30 |
---|---|---|---|
Surface resistivity | ASTM D257/IEC 60093 | 1.E+15 Ω | |
Volume resistivity | ASTM D257/IEC 60093 | 1.E+14 Ω.cm |
other | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/5010G-30 |
---|---|---|---|
purpose | 30%玻纤增强 |
Physical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/5010G-30 |
---|---|---|---|
density | ASTM D792/ISO 1183 | 1.52 | |
melt mass-flow rate | ASTM D1238/ISO 1133 | 15 g/10min | |
Shrinkage rate | ASTM D955 | 0.2 % | |
Water absorption rate | ASTM D570/ISO 62 | 0.07 % |