Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPS R-7-120BL CPCHEM USA
Ryton®
Automotive sector、Electronic communication 、Electronic communication 、Application in the automo
Flame retardant、High rigidity、wear resistant、Chemical resistance、High temperature resistan、Filler: Glass mineral
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Thermal Properties | Test Condition | Test Method | CPCHEM USA/R-7-120BL |
|---|---|---|---|
| Linear thermal expansion coefficient | TD：100到200°C | ASTME831 | 7E-05 cm/cm/°C |
| Heat Deflection Temperature | 1.8MPa,未退火 | ASTMD648 | 265 °C |
| Linear thermal expansion coefficient | MD：100到200°C | ASTME831 | 1.5E-05 cm/cm/°C |
| MD：-50到50°C | ASTME831 | 1.5E-05 cm/cm/°C | |
| TD：导热系数 | ASTME831 | 0.59 W/m/K | |
| TD：-50到50°C | ASTME831 | 3E-05 cm/cm/°C | |
| UL Temperature Rating | UL746B | 220to240 °C |
| Hardness | Test Condition | Test Method | CPCHEM USA/R-7-120BL |
|---|---|---|---|
| Rockwell Hardness | R计秤 | ASTMD785 | 118 |
| M计秤 | ASTMD785 | 101 |
| Mechanical Properties | Test Condition | Test Method | CPCHEM USA/R-7-120BL |
|---|---|---|---|
| Tensile Stress | ISO527-2 | 135 Mpa | |
| Flexural Modulus | ISO178 | 19000 Mpa | |
| Tensile Strength | ASTMD638 | 124 Mpa | |
| Tensile Elongation | 断裂 | ASTMD638 | 0.90 % |
| Flexural Modulus | ASTMD790 | 19300 Mpa | |
| Flexural Strength | ASTMD790 | 207 Mpa | |
| Tensile Strain | 断裂 | ISO527-2 | 0.80 % |
| Compressive Strength | ASTMD695 | 265 Mpa | |
| Flexural Stress | ISO178 | 210 Mpa | |
| Poisson Ratio | ISO527 | 0.36 |
| Physical | Test Condition | Test Method | CPCHEM USA/R-7-120BL |
|---|---|---|---|
| Moisture Absorption | 23°C,24hr | ASTMD570 | 0.020 % |
| Modeling Shrinkage | TD：3.20mm | 0.40 % | |
| Density / Specific Gravity | ASTMD792 | 1.99 g/cm³ | |
| Modeling Shrinkage | MD：3.20mm | 0.20 % |
| Impact Properties | Test Condition | Test Method | CPCHEM USA/R-7-120BL |
|---|---|---|---|
| Unnotched Izod Impact Strength | 3.18mm | ASTMD4812 | 210 J/m |
| Notched Izod impact strength | ISO180 | 15 kJ/m² | |
| Notched Izod Impact Strength | 3.17mm | ASTMD256 | 53 J/m |
| ISO180/A | 6.0 kJ/m² |
| Flammability | Test Condition | Test Method | CPCHEM USA/R-7-120BL |
|---|---|---|---|
| Oxygen Index | ASTMD2863 | 61 % | |
| Flame Rating | 1.6mm | UL94 | V-05VA |
| Electrical Properties | Test Condition | Test Method | CPCHEM USA/R-7-120BL |
|---|---|---|---|
| Dielectric Constant | 25°C,1MHz | ASTMD150 | 4.90 |
| Comparative Tracking Index | CTI | UL746 | 250 V |
| Dielectric Strength | ASTMD149 | 16 KV/mm | |
| Surface Resistivity | ASTMD257 | 1E+16 ohms | |
| Dielectric Constant | 25°C,1kHz | ASTMD150 | 4.90 |
| Volume Resistivity | ASTMD257 | 1E+15 ohms·cm | |
| 90°C | 1E+11 ohms | ||
| Dissipation Factor? | 25°C,1kHz | ASTMD150 | 4E-03 |
| Arc Resistance | ASTMD495 | 185 sec | |
| Dissipation Factor? | 25°C,1MHz | ASTMD150 | 2E-03 |
Contact Us
Get App
Top