Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA RTP 4404 HS RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | RTP US/RTP 4404 HS |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 3.18mm | ASTM D4812 | 560 J/m |
| Impact strength of cantilever beam gap | 3.18mm,注塑 | ASTM D256 | 80 J/m |
| Mechanical properties | Test Condition | Test Method | RTP US/RTP 4404 HS |
|---|---|---|---|
| Flexural modulus | 注塑 | ASTM D790 | 7920 MPa |
| bending strength | 注塑 | ASTM D790 | 207 MPa |
| tensile strength | ASTM D638 | 148 MPa | |
| elongation | 屈服,注塑 | ASTM D638 | 2.1 % |
| Tensile modulus | 注塑 | ASTM D638 | 8610 MPa |
| Electrical performance | Test Condition | Test Method | RTP US/RTP 4404 HS |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | 1E+12 ohms |
| physical property | Test Condition | Test Method | RTP US/RTP 4404 HS |
|---|---|---|---|
| Shrinkage rate | MD：3.18mm,注塑 | ASTM D955 | 0.35 % |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.43 % |
| density | ASTM D792 | 1.37 g/cm³ |
| Thermal performance | Test Condition | Test Method | RTP US/RTP 4404 HS |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火,注塑，HDT | ASTM D648 | 260 °C |
Contact Us
Get App
Top