Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP EH104AE BOREALIS EUROPE
Daplen™
Car bumper、Automotive sector、Automotive External Parts、Car exterior decoration、Food packaging、film
High rigidity、High impact resistance、High mobility、Impact resistance、filler、Mineral filler、12%、Filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | BOREALIS EUROPE/EH104AE |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23℃,注塑 | ISO 180/1A | 33 kJ/m² |
| tensile strength | 23℃,注塑 | ISO 179/1eA | 31 kJ/m² |
| Impact strength of cantilever beam gap | -20℃,注塑 | ISO 180/1A | 5.5 kJ/m² |
| Tensile modulus | 注塑 | ISO 527-2/1 | 1150 Mpa |
| tensile strength | 弯曲应力，注塑 | ISO 868 | 21 Mpa |
| 简支梁缺口冲击强度，-30℃,注塑 | ISO 179/1eA | 4 kJ/m² | |
| 拉伸应变，屈服,注塑 | ISO 527-2/50 | 5.2 % | |
| Impact strength of simply supported beam without notch | -20℃,注塑 | ISO 179/1eU | 30 kJ/m² |
| tensile strength | -20℃,注塑 | ISO 179/1eA | 5.5 kJ/m² |
| 屈服,注塑 | ISO 527-2/50 | 16.0 Mpa | |
| Impact strength of simply supported beam without notch | 23℃,注塑 | ISO 179/1eU | 无断裂 kJ/m² |
| tensile strength | 弯曲模量，注塑 | ISO 178 | 1150 Mpa |
| physical property | Test Condition | Test Method | BOREALIS EUROPE/EH104AE |
|---|---|---|---|
| Shrinkage rate | 内部方法 | 0.80 % | |
| melt mass-flow rate | 230℃/2.16 kg | ISO 1183 | 40 g/10 min |
| ball-indentation hardness | ISO 2039-1 | 28.0 Mpa |
| Thermal performance | Test Condition | Test Method | BOREALIS EUROPE/EH104AE |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD：-30 到 80℃ | 内部方法 | 6.8E-05 cm/cm/℃ |
| vicat | ISO 306/B | 40 °C | |
| Heat distortion temperature | 1.8 MPa,未退火，HDT | ISO 75-2/A | 47 °C |
| vicat | ISO 306/A | 122 °C | |
| Heat distortion temperature | 0.45 MPa,未退火，HDT | ISO 75-2/B | 80 °C |
Contact Us
Get App
Top