Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC EMERGE™ PC 4202-8 Trinseo
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Trinseo/EMERGE™ PC 4202-8 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 110 J/m |
| hardness | Test Condition | Test Method | Trinseo/EMERGE™ PC 4202-8 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 122 |
| Mechanical properties | Test Condition | Test Method | Trinseo/EMERGE™ PC 4202-8 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 3.0 % |
| Tensile modulus | ASTM D638 | 5170 MPa | |
| Flexural modulus | ASTM D790 | 4960 MPa | |
| tensile strength | 断裂 | ASTM D638 | 82.7 MPa |
| 屈服 | ASTM D638 | 82.7 MPa | |
| bending strength | ASTM D790 | 148 MPa |
| flammability | Test Condition | Test Method | Trinseo/EMERGE™ PC 4202-8 |
|---|---|---|---|
| UL flame retardant rating | 3.0mm | UL 94 | V-0 |
| 1.6mm | UL 94 | V-2 | |
| Limiting Oxygen Index | ASTM D2863 | 30 % |
| physical property | Test Condition | Test Method | Trinseo/EMERGE™ PC 4202-8 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.20 % |
| density | ASTM D792 | 1.36 g/cm³ | |
| melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 8.0 g/10min |
| Thermal performance | Test Condition | Test Method | Trinseo/EMERGE™ PC 4202-8 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 138 °C |
| 1.8MPa,退火，HDT | ASTM D648 | 142 °C | |
| vicat | ASTM D15252 | 159 °C | |
| Heat distortion temperature | 0.45MPa,退火，HDT | ASTM D648 | 148 °C |
Contact Us
Get App
Top