Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
MPR 4660 NC USA Advanced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodUSA Advanced/ 4660 NC
DurometerHardnessShoreA,1.91mm,CompressionMoldedASTM D224057
IRHD hardnessISO 4857
Mechanical propertiesTest ConditionTest MethodUSA Advanced/ 4660 NC
Tensile strainBreak,1.91mm,CompressionMoldedASTM D638440 %
Tensile modulus1.91mm,CompressionMoldedASTM D6382.62 MPa
1.91mm,CompressionMoldedISO 527-22.62 MPa
tensile strength Yield,1.91mm,CompressionMoldedASTM D6388.45 MPa
Taber abraser1000Cycles,1000g,CS-17转轮ASTM D10444.00 mg
Tensile strainBreak,1.91mm,CompressionMoldedISO 527-2440 %
tensile strength Yield,1.91mm,CompressionMoldedISO 527-28.45 MPa
physical property Test ConditionTest MethodUSA Advanced/ 4660 NC
densityASTM D7921.17 g/cm³
ISO 11831.17 g/cm³
elastomerTest ConditionTest MethodUSA Advanced/ 4660 NC
compression set100°C,22hrASTM D395B72 %
Clash Mountain Module-40°CASTM D104368.9 MPa
compression set24°C,22hrISO 81516 %
tear strength24°CASTM D62429.8 kN/m
Stretch permanent deformationASTM D4127 %
compression set100°C,22hrISO 81572 %
24°C,22hrASTM D395B16 %
agingTest ConditionTest MethodUSA Advanced/ 4660 NC
volume change24°C,168hr,inReferenceFuelBASTM D47113 %
100°C,168hr,inASTM#3OilASTM D47114 %
Hardness change rate in the air125°C,168hrASTM D47154
elongation at break125°C,168hrASTM D471400 %
volume change100°C,168hr,在水中ASTM D4719.0 %
100°C,168hr,inASTM#1OilASTM D471-19 %
Shore hardness125°C,168hrISO 18854
Thermal performanceTest ConditionTest MethodUSA Advanced/ 4660 NC
brittle temperatureISO 974-68.9 °C
ASTM D746-68.9 °C

Contact Us

Get App

Top